MEW/ME Mugs going cheap!

[Neil WyattModerator @neilwyatt]

[Neil WyattModerator @neilwyatt]

MyHobbyStore have an offer on Model Engineer/Model Engineers' Workshop mugs – one logo on each side.

They are £3.49 reduced from £4.99.

http://www.myhobbystore.co.uk/product/24876/model-engineer-mugs

Neil

Edited By Neil Wyatt on 03/03/2016 14:49:29

[NJHParticipant @njh]

Sorry Neil

I thought it was birds – not mugs that went cheep……………

OK I'm going out now.

Norman

Ps Good offer but there are plenty of mugs in our house (OK, OK I can anticipate the comments) At the last count there were 36 mugs. Might seem excessive over- provision as it's just the boss and I living here. ! It's surprising though how often we go to the mug cupboard and find they've all been used – especially after a visit from the kids !

Norman

[Neil WyattModerator @neilwyatt]

… and if there are any mugs they are always silly little ones small Easter eggs come in

Neil

[Michael Cox 1Participant @michaelcox1]

Hi Neil,

Is this your contribution to the "ceramics in the workshop" discussion!!

Mike

[DMBParticipant @dmb]

We’ve still got loads o’ el cheapo red Nescafe mugs from their last offer and how long ago was that?

[pgk pgkParticipant @pgkpgk17461]

…If I'm asked nicely and sent a few free mugs then I'll waive my usual fee for endorsing a product….

[BazyleParticipant @bazyle]

Will they be available at the show to avoid postage? Be a bit more interesting if printed either with ME related picture (not just another loco though) or perhaps some pertinent info like cutting speeds and taping sizes.

Actually you might look into one of those while you wait photo printers for the show, to print on the other side of the mug, with a selection of pictures from ME/MEW or here. eg some of Jason's engines. Further easy sell would be pictures of common models eg Simplex, Pansy, etc.

[JasonBModerator @jasonb]

I got mine free from another forum and with my name on it

[John Stevenson 1Participant @johnstevenson1]

Thought your name was Jason ?

[MWParticipant @mw27036]

A post from engineering ceramics to domestic ceramics eh? At least there would be no mistaking for who's mug it is in my household.

Michael W

[Howard LewisParticipant @howardlewis46836]

I thought that this was a new slant on "Ceramics in the Workshop", until Neil said that he would look into it.

Reading the Tea Leaves, yet another skill displayed on the Forum?

A long time ago, I had a mug with glazed greasy handprints on it and a nut and bolt inside, but it was withdrawn from service as unhygenic.

Howard

Edited By Howard Lewis on 03/03/2016 16:27:59

[Gary WoodingParticipant @garywooding25363]

With delivery charge of £1.99 for one, or £3.99 for two, it's not such a good deal.

[ASFParticipant @asf]

There appeared to only be three up for sale earlier. Now only one

[Author]

Posts