Locomotive Modelling in Ireland

[MICHAEL Moore 1Participant @michaelmoore1]

Hi all,

Michael from Ireland here

I need to sharpen end mills and drill bits as I work a lot in stainless

Whats my best option.

I have about £500 to spend

[MICHAEL Moore 1Participant @michaelmoore1]

End Mill sharpening

[Ady1Participant @ady1]

There's quite a few articles on working stainless in here

[David Standing 1Participant @davidstanding1]

Welcome to the forum .

And, may I point out on a point of etiquette, copying and pasting my tool cutter grinder wanted ad into yours is on the threshold somewhere between lazy and plagiarism .

[David Standing 1Participant @davidstanding1]

Posted by Ady1 on 29/12/2016 21:09:28:

There's quite a few articles on working stainless in here

But I don't think it answers the OP's question? .

[steamdaveParticipant @steamdave]

For £500 you could buy a lifetime's supply of carbide cutters new. Why bother with resharpening, unless of course you like the challenge.

Have a look at Bangood or Aliexpress.

Dave
The Emerald Isle

[Author]

Posts