The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Workshop Tools and Tooling › Large lathe for sale
Anyone want a bigger lathe? **LINK**
Definitely better value than a new Myford.
I doubt Mrs Jimmy b would let me!
Jim
Not a bad price or is that $ per metre?
You'd need to get the step ladder out every time you wanted to chuck up another bar of 1" EN1A
Will it run off a 13amp socket?
Think they got the scale ratios wrong – model engineers work in ranges of 1:n , not n:1…
No good to me, the top speed is far too low.
Neil
I think you will need an inverter as its 3 phase
Mike
Don't think Planning would let me build a garage long enough to house it; heck, they won't even let me build one long enough to accommodate my standard size VW van and have enough room to walk around it on one end.
I like the idea of a "chip conveyor"….
Is the tailstock MT3 and the headstock 1.5" BSF ? If not I'm not buying it because I couldn't swap tooling between this and my Viceroy !
Martin
Who ya gonna call . . .
https://homeworkshop.org.uk/index.php?option=com_content&view=article&id=8:landylift&catid=18:traders&Itemid=20
I think it will be big enough …
"Maximum Workpiece Weight 350000kg."
But does it have enough speed for carbide?
Home › Forums › Workshop Tools and Tooling › Topics
Started by: IanT in: Workshop Tools and Tooling
Speedy Builder5
Started by: AJBAJB in: Locomotives
AJBAJB
Started by: Peter Simpson 3 in: Beginners questions
Howard Lewis
Started by: Andrew Tinsley in: General Questions
JasonB
Started by: Speedy Builder5 in: Workshop Tools and Tooling
Dave Halford
Andrew Tinsley
Started by: Dalboy in: Materials
Phil P
Started by: JasonB in: The Tea Room
Started by: Werner Schleidt in: Exhibitions, Shows and Club Events
Harry Wilkes
Started by: Graham Meek in: Manual machine tools
Pete
Started by: engineeredbyhansson in: Manual machine tools
engineeredbyhansson
Started by: Geoff Dunsby in: CAD – Technical drawing & design
Geoff Dunsby
Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
renardiere7
Started by: Chris Kirby 1 in: Help and Assistance! (Offered or Wanted)
Macolm
Started by: Michael Gilligan in: Manual machine tools
southernchap
Graham Meek
Started by: BOB BLACKSHAW 1 in: The Tea Room
Martin Connelly
Started by: Phil Whitley in: The Tea Room
Phil Whitley
Started by: point.two.five in: Introduce Yourself – New members start here!
point.two.five
Started by: leeboxford280t in: Manual machine tools
John Hinkley
Started by: ian Holdsworth in: Beginners questions
Paul Lousick
Started by: Garry Coles in: General Questions
Nigel Graham 2
Started by: Clive Farrar in: General Questions
bernard towers
Started by: daz996 in: Beginners questions
5sahib
Started by: Graeme Seed in: Workshop Tools and Tooling
View full reply list.