Just incase anyone is bored tomorrow and local

This topic has 5 replies, 3 voices, and was last updated 20 April 2017 at 08:00 by Curtis Rutter.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
19 April 2017 at 18:57 #294116
Curtis Rutter
Participant
@curtisrutter61973
Could do with a spare set of hands and some pointers installing DRO. I'm in Ware, East Hertfordshire.
Advert

19 April 2017 at 18:57 #32952
Curtis Rutter
Participant
@curtisrutter61973
19 April 2017 at 20:35 #294125
nigel jones 5
Participant
@nigeljones5
Sorry nowhere near, but for encouragement I recently fitted one to my 1950 lathe and found it very straightforward. Good luck.
19 April 2017 at 21:21 #294127
Curtis Rutter
Participant
@curtisrutter61973
yea, the instructions look pretty clear, always better to have an extra pair of hands and eyes though!
20 April 2017 at 07:30 #294162
Paul Lousick
Participant
@paullousick59116
Curtis,

Is it for a mill or for a lathe ? What type ?

Paul
20 April 2017 at 08:00 #294166
Curtis Rutter
Participant
@curtisrutter61973
its for a lathe, its the M-DRO 3 axis
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 151
- 23 July 2026 at 05:43
  Speedy Builder5
- It’s A Compressor, Jim, But Not…
  Started by: Nigel Graham 2 in: General Questions
- 11
- 23
- 23 July 2026 at 02:17
  Grindstone Cowboy
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 22
- 23 July 2026 at 02:10
  Grindstone Cowboy
- Bridgeport Series 1 CNC 1 2 3 4
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 76
- 23 July 2026 at 00:47
  seemack
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 1
- 1
- 22 July 2026 at 23:32
  Michael Gilligan
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 3
- 3
- 22 July 2026 at 23:03
  paulmichael1084
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 13
- 22 July 2026 at 23:02
  peter allen 1
- Is anyone interested in developping a new series of model engines? 1 2 3
  Started by: paulmichael1084 in: General Questions
- 18
- 68
- 22 July 2026 at 22:26
  duncan webster 1
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 2
- 22 July 2026 at 18:56
  Peter Cook 6
- Hi folks – the answer to everything is 42
  Started by: hughgee42 in: Introduce Yourself – New members start here!
- 2
- 2
- 22 July 2026 at 16:59
  jaCK Hobson
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 5
- 7
- 22 July 2026 at 14:24
  bernard towers
- Unusual Crawford Collets and where to test them
  Started by: Rainbows in: Workshop Tools and Tooling
- 1
- 1
- 22 July 2026 at 13:32
  Rainbows
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 8
- 22 July 2026 at 11:40
  bernard towers
- Panasonic Hard Disk Recorder
  Started by: Michael Gilligan in: Electronics in the Workshop
- 1
- 1
- 21 July 2026 at 22:48
  Michael Gilligan
- Using an emergency collet
  Started by: Dell in: Workshop Tools and Tooling
- 8
- 17
- 21 July 2026 at 15:13
  Dell
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 6
- 10
- 21 July 2026 at 10:34
  Julie Ann
- Help please! Workshop clearance 1 2
  Started by: ksw in: General Questions
- 13
- 31
- 20 July 2026 at 23:54
  Bill Phinn
- Cormak TU2807v gearing issues
  Started by: paul_go in: General Questions
- 2
- 7
- 20 July 2026 at 21:14
  paul_go
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 10
- 37
- 20 July 2026 at 17:02
  ega
- Band saw 1 2 3 4
  Started by: Peter Simpson 3 in: Beginners questions
- 25
- 82
- 20 July 2026 at 16:55
  ega
- Gents C7 electric master clock
  Started by: Robert Atkinson 2 in: Clocks and Scientific Instruments
- 5
- 12
- 20 July 2026 at 16:44
  John Haine
- Interactive article on Beam Engines
  Started by: glinscott in: Stationary engines
- 7
- 17
- 20 July 2026 at 14:30
  Journeyman
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 67
- 20 July 2026 at 09:00
  dean clarke 2
- Steam Loco component interconnection diagram
  Started by: Trevor Wood 6 in: Beginners questions
- 5
- 8
- 19 July 2026 at 23:57
  Nigel Graham 2
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 5
- 9
- 19 July 2026 at 13:12
  Roderick Jenkins

Just incase anyone is bored tomorrow and local

Just incase anyone is bored tomorrow and local

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies