Don Youngs BR Standard 2

Don Youngs BR Standard 2

This topic has 1 reply, 1 voice, and was last updated 11 December 2021 at 12:17 by Peter Simpson 3.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
11 December 2021 at 12:17 #11048
Peter Simpson 3
Participant
@petersimpson3
Advert

11 December 2021 at 12:17 #575006
Peter Simpson 3
Participant
@petersimpson3
I realise this is a long shot, has anybody out there built a boiler for the above loco ? The reason I ask is that I'm about to drill the boiler barrel to fit the regulator bush, The plans show, and the build notes state the boiler bush is located at 3/8" behind the dome centre line which looks to be wrong. Several of the other dimensions around the regulator are totally wrong.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Current Thoughts on 3 Phase Smart Meters
  Started by: Colin Heseltine in: The Tea Room
- 2
- 2
- 7 October 2026 at 06:08
  John Haine
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 2
- 4
- 7 October 2026 at 06:07
  John Haine
- Turbo 90 welding set
  Started by: Michael Callaghan in: Workshop Tools and Tooling
- 3
- 3
- 7 October 2026 at 02:34
  Bill Phinn
- Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap
  Started by: jon hill 3 in: Related Hobbies including Vehicle Restoration
- 8
- 11
- 7 October 2026 at 02:16
  Bill Phinn
- Myford ML7 gearbox and how it affects metric change wheels.
  Started by: philml7 in: Introduce Yourself – New members start here!
- 7
- 9
- 7 October 2026 at 01:20
  peak4
- Locomotion No 1 – plans
  Started by: Bob Wild in: Help and Assistance! (Offered or Wanted)
- 1
- 1
- 7 October 2026 at 00:29
  Bob Wild
- Portoss lathe – new to me.
  Started by: File Handle in: Beginners questions
- 6
- 16
- 7 October 2026 at 00:15
  Nigel Graham 2
- Window weights as a source of cast iron.?
  Started by: File Handle in: Materials
- 10
- 10
- 6 October 2026 at 21:55
  Nigel Graham 2
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 5
- 12
- 6 October 2026 at 18:43
  Dave S
- Blank posts in forum
  Started by: Mark Rand in: New Forum Software questions, comments and Test Threads
- 5
- 5
- 6 October 2026 at 18:32
  JasonB
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 7
- 15
- 6 October 2026 at 17:41
  Mick Bailey
- 5 inch gauge Stirling single injector position
  Started by: Michael Callaghan in: Locomotives
- 2
- 2
- 6 October 2026 at 17:33
  Baz
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 1
- 1
- 6 October 2026 at 16:37
  JasonB
- Hello everyone
  Started by: andrew998 in: Introduce Yourself – New members start here!
- 2
- 2
- 6 October 2026 at 16:24
  Grindstone Cowboy
- Problem firing up
  Started by: Michael Callaghan in: General Questions
- 13
- 19
- 6 October 2026 at 15:45
  Bazyle
- Drilling accurate depth holes 1 2
  Started by: Bob Sillitoe in: Beginners questions
- 15
- 30
- 6 October 2026 at 14:14
  Bob Sillitoe
- Where is it all going? Claude – CAD – product
  Started by: Mike Hurley in: CAD – Technical drawing & design
- 9
- 14
- 6 October 2026 at 13:58
  Andy Stopford
- Indiana ME Show 26
  Started by: JasonB in: Exhibitions, Shows and Club Events
- 3
- 3
- 6 October 2026 at 11:53
  Weary
- FORNCETT STEAM MUSEUM 4th Oct 2026
  Started by: noel shelley in: Exhibitions, Shows and Club Events
- 4
- 4
- 6 October 2026 at 08:22
  mike barrett 1
- Cross Drilling Jigs
  Started by: peak4 in: Workshop Tools and Tooling
- 9
- 21
- 5 October 2026 at 18:50
  old mart
- Preview of whats coming in Freecad 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 4
- 17
- 5 October 2026 at 16:09
  Russell Eberhardt
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 81
- 5 October 2026 at 15:04
  John Hinkley
- Midlands Model Engineering Exhibition, Thursday 15th to Sunday 18th October 2026
  Started by: Meridienne Exhibitions 1 in: Exhibitions, Shows and Club Events
- 4
- 7
- 5 October 2026 at 10:12
  Meridienne Exhibitions 1
- Interactive article on How Machines Learned Precision
  Started by: glinscott in: Suggested Online Resources
- 6
- 8
- 5 October 2026 at 01:27
  Pete
- Warco WM180 Autofeed Speed 1 2
  Started by: James A in: Workshop Tools and Tooling
- 13
- 37
- 4 October 2026 at 22:51
  southernchap

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies