Copper tube

Copper tube

This topic has 3 replies, 3 voices, and was last updated 10 December 2023 at 17:19 by noel shelley.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
10 December 2023 at 16:18 #698518
Dougie Swan
Participant
@dougieswan43463
Hi

Can anyone help me with a supplier of 6″ dia copper tube

Thanks

Dougie
Advert

10 December 2023 at 16:28 #698520
Weary
Participant
@weary
Wall thickness???

M-Machine can supply 6″ diameter 106 x 10swg.; & more than likely other wall thicknesses too if you ask.

Other suppliers available with a bit of searching.

Regards,

Phil
10 December 2023 at 16:44 #698527
Dougie Swan
Participant
@dougieswan43463
Thanks Phil

Dougie
10 December 2023 at 17:19 #698533
noel shelley
Participant
@noelshelley55608
Is this for a boiler ? If so then pay special note to wall thickness ! There are numerous suppliers, check the ME press. Noel.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 4
- 6
- 25 June 2026 at 23:29
  Bill Phinn
- EmcoF1
  Started by: troy h in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 25 June 2026 at 21:43
  troy h
- LINKS FOR WORKSHOP AND MODEL ENGINEERING STLs AND OTHER FILES
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 4
- 5
- 25 June 2026 at 21:29
  John Hinkley
- Emco Compact 5 milling table restoration
  Started by: rikt in: Manual machine tools
- 6
- 12
- 25 June 2026 at 19:36
  Pete
- Testing Single Point Thread Fitment
  Started by: berwick in: Beginners questions
- 14
- 21
- 25 June 2026 at 19:15
  Pete
- 3D Printing in the Home Workshop
  Started by: Colin Heseltine in: 3D Printers and 3D Printing
- 7
- 10
- 25 June 2026 at 19:06
  Gerard O’Toole
- Rapidor 3XM
  Started by: homecat88 in: Introduce Yourself – New members start here!
- 3
- 10
- 25 June 2026 at 18:58
  Clive Foster
- Letters and Parcels Box
  Started by: Michael Gilligan in: The Tea Room
- 9
- 13
- 25 June 2026 at 17:58
  Michael Gilligan
- Help please! Workshop clearance
  Started by: ksw in: General Questions
- 6
- 16
- 25 June 2026 at 17:33
  ksw
- Oiling Lathe Ways
  Started by: Blue Heeler in: Beginners questions
- 8
- 9
- 25 June 2026 at 17:13
  Pete
- Hot milk variations
  Started by: Gary Wooding in: The Tea Room
- 12
- 19
- 25 June 2026 at 15:31
  Oily Rag
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 22
- 38
- 25 June 2026 at 14:33
  ega
- How Good Are 3D Printers? 1 2
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 15
- 32
- 25 June 2026 at 11:22
  Neil Wyatt
- Hot radiators in summer
  Started by: Gary Wooding in: The Tea Room
- 13
- 18
- 25 June 2026 at 11:17
  Howard Lewis
- Moving a Chester MF42Bb(removing milling tool)
  Started by: bowmandj1953 in: Introduce Yourself – New members start here!
- 3
- 6
- 25 June 2026 at 10:49
  bowmandj1953
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 57
- 25 June 2026 at 06:21
  dean clarke 2
- Running 380V 3-phase motor on 230V 1-phase 1 2
  Started by: jimalm in: Electronics in the Workshop
- 15
- 42
- 25 June 2026 at 00:54
  Andrew Kett
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 655
- 24 June 2026 at 21:02
  Turbine Guy
- digital microscope for poor eyesight
  Started by: bernard towers in: Electronics in the Workshop
- 14
- 23
- 24 June 2026 at 19:40
  Neil Wyatt
- FARM BOY Ignition
  Started by: Speedy Builder5 in: I/C Engines
- 3
- 4
- 24 June 2026 at 15:17
  Speedy Builder5
- Gas Tap Valves. Vintage 1 2 3
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 19
- 53
- 23 June 2026 at 21:24
  Nigel Graham 2
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 10
- 42
- 23 June 2026 at 21:05
  Charles Jambon
- Rapidor Manchester re-build
  Started by: homecat88 in: Introduce Yourself – New members start here!
- 3
- 5
- 23 June 2026 at 19:19
  homecat88
- Advice required
  Started by: janet.ho001 in: Introduce Yourself – New members start here!
- 4
- 7
- 23 June 2026 at 19:12
  janet.ho001
- Orbital – Not your Usual Oscillator! 1 2
  Started by: JasonB in: Stationary engines
- 14
- 28
- 23 June 2026 at 19:11
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies