Clack ball lift question

This topic has 1 reply, 1 voice, and was last updated 11 May 2017 at 18:32 by John Billard 1.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
11 May 2017 at 18:32 #297678
John Billard 1
Participant
@johnbillard1
The top feed water pump clack is letting by a little on my Martin Evans 5" Manor after a lot of use. Can anyone advise as to what the ideal ball lift might be? (3/16" ball). Currently it is about 80 thou.and I think the height adjustment pin has worn. I have had it suggested that it should be nearer 1/64" – 0.0156.

Many thanks

John B
Advert

11 May 2017 at 18:32 #1605
John Billard 1
Participant
@johnbillard1
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 3
- 7
- 2 July 2026 at 23:57
  Tony Ray
- Gas Tap Valves. Vintage 1 2 3 4
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 21
- 79
- 2 July 2026 at 23:23
  Bill Phinn
- Clarkson radius grinding attachment
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 3
- 5
- 2 July 2026 at 22:51
  Andrew Tinsley
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 58
- 2 July 2026 at 22:45
  dean clarke 2
- Running 380V 3-phase motor on 230V 1-phase 1 2 3 4
  Started by: jimalm in: Electronics in the Workshop
- 20
- 85
- 2 July 2026 at 22:38
  Vic
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 27
- 60
- 2 July 2026 at 22:09
  vintagengineer
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 6
- 10
- 2 July 2026 at 22:08
  duncan webster 1
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 1
- 1
- 2 July 2026 at 17:47
  Michael Gilligan
- Lathework for Beginners 1 2 … 4 5
  Started by: Neil Wyatt in: Manual machine tools
- 24
- 111
- 2 July 2026 at 17:36
  Howard Lewis
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 12
- 18
- 2 July 2026 at 17:08
  Howard Lewis
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 117
- 2 July 2026 at 16:49
  jaCK Hobson
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 4
- 6
- 2 July 2026 at 13:47
  David Jupp
- Martin Cleeve Swing Clear Retracting Toolholder 1 2
  Started by: Roger Harvey in: Workshop Tools and Tooling
- 18
- 26
- 2 July 2026 at 10:03
  ega
- Replacement belt for Mk1 Clarkson cutter grinder.
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 6
- 8
- 1 July 2026 at 20:53
  Andrew Tinsley
- ultra sonic cleaner
  Started by: Dalboy in: General Questions
- 10
- 13
- 1 July 2026 at 19:59
  Graham Meek
- How to stop juddering
  Started by: Peter Simpson 3 in: Beginners questions
- 7
- 10
- 1 July 2026 at 15:11
  Peter Simpson 3
- Small hobby lathes.
  Started by: activeviii in: General Questions
- 7
- 10
- 1 July 2026 at 12:41
  lukeama123
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 37
- 1 July 2026 at 12:29
  Dave Halford
- Links for Workshop and Model Engineering STLs and other files.
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 9
- 12
- 1 July 2026 at 11:29
  timdotd
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 36
- 1 July 2026 at 10:51
  Graham Meek
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 24
- 40
- 30 June 2026 at 17:41
  Diogenes
- Using VFDs on old motors
  Started by: Andrew Skinner in: Electronics in the Workshop
- 11
- 22
- 30 June 2026 at 17:07
  Robert Atkinson 2
- Bateman Precision Pendulum Clock
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 2
- 2
- 30 June 2026 at 15:02
  John Haine
- DRO instructions
  Started by: Speedy Builder5 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 3
- 30 June 2026 at 12:11
  Speedy Builder5
- How do I learn machining ? 1 2 3 4
  Started by: paul1956 in: Beginners questions
- 32
- 95
- 30 June 2026 at 12:05
  bernard towers

Clack ball lift question

Clack ball lift question

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies