Carbide Inserts

[Alan Waddington 2Participant @alanwaddington2]

A long shot i realise, but i'm after some inserts for a 45 degree face mill. Iso code is SEHW1605 they measure 16mm x 5 mm and have a csk 5mm hole. Nothing turning up on ebay, plenty of 12mm ones around. I need a minimum of 7 if anyone has any they would like to sell.

[Alan Waddington 2Participant @alanwaddington2]

[pgk pgkParticipant @pgkpgk17461]

Searching with a space between letters and digits gave this link **LINK**

[Alan Waddington 2Participant @alanwaddington2]

Posted by pgk pgk on 04/11/2017 14:25:41:

Searching with a space between letters and digits gave this link **LINK**

Cheers mate, yes it's a Maydown face mill, but i hate to think how much the inserts will be from them.

I can guess at £100 to £120 per 10 I'm hoping to pick a set up on the cheap, as i don't even know if my mill is up to running it.

It came with a job lot of 40 int tooling, and i would like to give it a go, but at 125mm diameter i have my doubts as to it's suitability for my mill.

[Alan Waddington 2Participant @alanwaddington2]

Well i got sorted with a set of inserts for a couple of quid a piece from a very helpful and knowledgable ebay seller. Anyone needing inserts i would highly reccomend the seller Dellunn on ebay.

Just need a job to try the beast out on now…….should make the chips fly for sure

[Michael GilliganParticipant @michaelgilligan61133]

Posted by Alan Waddington 2 on 07/11/2017 20:28:41:

Anyone needing inserts i would highly reccomend the seller Dellunn on ebay.

.

Thanks Alan … I have saved dellunn for future reference.

MichaelG.

.

No real likelihood of me ever using a cutter as big as yours though !!

[David Standing 1Participant @davidstanding1]

Posted by Alan Waddington 2 on 07/11/2017 20:28:41:

Well i got sorted with a set of inserts for a couple of quid a piece from a very helpful and knowledgable ebay seller. Anyone needing inserts i would highly reccomend the seller Dellunn on ebay.

Just need a job to try the beast out on now.……should make the chips fly for sure

How about Crossrail 2?

[Author]

Posts