Blower tube

[Michael CallaghanParticipant @michaelcallaghan68621]

Hi chaps, what tube do you use for the blower pipe that runs along inside the boiler. And who sales it in the U.K. thanks

[Clive Brown 1Participant @clivebrown1]

Reeves 2000 used to list it. Might be worth giving them a ring.

MACC models list 1/4″ x 16swg wall copper tube, which would take the usual 40tpi thread.

Could silver-solder bronze or copper end-pieces onto a length of thinner walled tubing, but that might not take much torque on assmbly.

[duncan webster 1Participant @duncanwebster1]

It is usually a stay, so be careful about using thin wall pipe

[Michael CallaghanParticipant @michaelcallaghan68621]

Thanks, sorted now

[Author]

Posts