5″ Black 5 Build

This topic has 1 reply, 1 voice, and was last updated 28 December 2016 at 02:14 by Max Simons.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
28 December 2016 at 02:14 #273989
Max Simons
Participant
@maxsimons88737
Hello everybody!,

So after receiving my loco in the mail, it turns out that i bought a part kit for a 5" black 5 by don young. I am in the process of drafting up the bogie frames, main frames, inner and outer tender frames, and front and rear beams. I am doing this so that i can get everything cut with a water jet.

The biggest issue i have had right off the bat is that the drawings i received are missing pages 1, 7 and 9. does anyone have them scanned in that can send them to me?

attached is a picture of the autocad drawing so far. as you can see, the main frames aren't completed just yet. there is an awful lot of extrapolating to do!
Advert

28 December 2016 at 02:14 #1577
Max Simons
Participant
@maxsimons88737
So many questions!
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 5
- 7
- 2 July 2026 at 19:29
  duncan webster 1
- Gas Tap Valves. Vintage 1 2 3
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 21
- 73
- 2 July 2026 at 19:03
  Robert Atkinson 2
- Running 380V 3-phase motor on 230V 1-phase 1 2 3 4
  Started by: jimalm in: Electronics in the Workshop
- 20
- 84
- 2 July 2026 at 18:41
  not done it yet
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 26
- 59
- 2 July 2026 at 18:38
  howardb
- Clarkson radius grinding attachment
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 3
- 3
- 2 July 2026 at 18:13
  noel shelley
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 1
- 1
- 2 July 2026 at 17:47
  Michael Gilligan
- Lathework for Beginners 1 2 … 4 5
  Started by: Neil Wyatt in: Manual machine tools
- 24
- 111
- 2 July 2026 at 17:36
  Howard Lewis
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 12
- 18
- 2 July 2026 at 17:08
  Howard Lewis
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 117
- 2 July 2026 at 16:49
  jaCK Hobson
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 4
- 6
- 2 July 2026 at 13:47
  David Jupp
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 3
- 6
- 2 July 2026 at 11:53
  Charles Jambon
- Martin Cleeve Swing Clear Retracting Toolholder 1 2
  Started by: Roger Harvey in: Workshop Tools and Tooling
- 18
- 26
- 2 July 2026 at 10:03
  ega
- Replacement belt for Mk1 Clarkson cutter grinder.
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 6
- 8
- 1 July 2026 at 20:53
  Andrew Tinsley
- ultra sonic cleaner
  Started by: Dalboy in: General Questions
- 10
- 13
- 1 July 2026 at 19:59
  Graham Meek
- How to stop juddering
  Started by: Peter Simpson 3 in: Beginners questions
- 7
- 10
- 1 July 2026 at 15:11
  Peter Simpson 3
- Small hobby lathes.
  Started by: activeviii in: General Questions
- 7
- 10
- 1 July 2026 at 12:41
  lukeama123
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 37
- 1 July 2026 at 12:29
  Dave Halford
- Links for Workshop and Model Engineering STLs and other files.
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 9
- 12
- 1 July 2026 at 11:29
  timdotd
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 36
- 1 July 2026 at 10:51
  Graham Meek
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 24
- 40
- 30 June 2026 at 17:41
  Diogenes
- Using VFDs on old motors
  Started by: Andrew Skinner in: Electronics in the Workshop
- 11
- 22
- 30 June 2026 at 17:07
  Robert Atkinson 2
- Bateman Precision Pendulum Clock
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 2
- 2
- 30 June 2026 at 15:02
  John Haine
- DRO instructions
  Started by: Speedy Builder5 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 3
- 30 June 2026 at 12:11
  Speedy Builder5
- How do I learn machining ? 1 2 3 4
  Started by: paul1956 in: Beginners questions
- 32
- 95
- 30 June 2026 at 12:05
  bernard towers
- New here but have the swarf cuts
  Started by: activeviii in: Introduce Yourself – New members start here!
- 1
- 1
- 30 June 2026 at 10:59
  activeviii

5″ Black 5 Build

5″ Black 5 Build

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies