5/16 x 26 tpi brass bolt

5/16 x 26 tpi brass bolt

This topic has 8 replies, 6 voices, and was last updated 27 December 2021 at 21:50 by Former Member.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
27 December 2021 at 18:50 #577003
Former Member
Participant
@formermember12892
[This posting has been removed]
Advert

27 December 2021 at 18:50 #11065
Former Member
Participant
@formermember12892
27 December 2021 at 18:56 #577004
duncan webster 1
Participant
@duncanwebster1
Not a hope. Tracy tools sell dies if you can't screw cut it
27 December 2021 at 19:14 #577011
Former Member
Participant
@formermember12892
[This posting has been removed]
27 December 2021 at 19:17 #577012
Michael Gilligan
Participant
@michaelgilligan61133
It may be worth looking at this, From 2010 : **LINK**

https://www.model-engineer.co.uk/forums/postings.asp?th=36526

MichaelG.
27 December 2021 at 19:52 #577019
peak4
Participant
@peak4
Would a stainless or mild steel one one do? They will be available in Cycle Thread from one of the specialist motorcycle suppliers or someone such as Grove.
https://www.groveco.co.uk/contents/en-uk/d44.html
http://www.nookysnuts.com/aboutus/aboutus.html

On the other hand, could you use M8?

I've just been checking my dies and chasers, but unfortunately absent, or I'd have made you one.

Bill

Edited By peak4 on 27/12/2021 20:00:19
27 December 2021 at 20:56 #577034
Nick Welburn
Participant
@nickwelburn
Think I have that die, what is it you need? Might take me a little time to produce I’m not sure I’ve got any brass stock in.
27 December 2021 at 21:27 #577038
Harry Wilkes
Participant
@harrywilkes58467
Posted by Nick Welburn on 27/12/2021 20:56:34:

Think I have that die, what is it you need? Might take me a little time to produce I’m not sure I’ve got any brass stock in.

Nice one

H
27 December 2021 at 21:50 #577042
Former Member
Participant
@formermember12892
[This posting has been removed]
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Annoying Ad
  Started by: jaCK Hobson in: Website Questions, Comments, and Suggestions
- 11
- 13
- 10 August 2026 at 10:45
  Graham Meek
- What tool is this?
  Started by: Pete CAMBRIDGE in: Workshop Tools and Tooling
- 6
- 10
- 10 August 2026 at 10:27
  Pete CAMBRIDGE
- Tools you hate using or just don’t get on with? 1 2
  Started by: Hollowpoint in: General Questions
- 23
- 34
- 10 August 2026 at 10:07
  Nigel Graham 2
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 14
- 73
- 10 August 2026 at 08:59
  Charles Lamont
- Problem firing up
  Started by: Michael Callaghan in: General Questions
- 6
- 8
- 10 August 2026 at 07:03
  Michael Callaghan
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 154
- 9 August 2026 at 22:43
  Nigel Graham 2
- Mystery debris? 1 2
  Started by: Bo’sun in: The Tea Room
- 16
- 28
- 9 August 2026 at 21:03
  Grizzly bear
- Stuart Beam Piston
  Started by: Chris Taylor 3 in: Beginners questions
- 9
- 23
- 9 August 2026 at 18:49
  Chris Taylor 3
- ELLIE the steam tram book – wanted
  Started by: apprentice in: Help and Assistance! (Offered or Wanted)
- 4
- 4
- 9 August 2026 at 15:18
  Bazyle
- Touch DRO Kit
  Started by: IanT in: Electronics in the Workshop
- 2
- 3
- 9 August 2026 at 14:55
  IanT
- IMLEC 2026
  Started by: Neil Wyatt in: Locomotives
- 1
- 1
- 9 August 2026 at 11:52
  Neil Wyatt
- The tea room
  Started by: larry phelan 1 in: General Questions
- 4
- 6
- 9 August 2026 at 08:37
  larry phelan 1
- Denford VMC 1300 CNC milling machine
  Started by: zoomer in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 6
- 11
- 8 August 2026 at 15:27
  John Haine
- SUSWE SU600A-2R2G1-B right mess
  Started by: tatler in: Electronics in the Workshop
- 5
- 10
- 8 August 2026 at 13:40
  tatler
- Decided to use castings
  Started by: BOB BLACKSHAW 1 in: General Questions
- 9
- 17
- 8 August 2026 at 13:36
  BOB BLACKSHAW 1
- A chemistry question
  Started by: duncan webster 1 in: The Tea Room
- 8
- 9
- 8 August 2026 at 11:31
  noel shelley
- VFD size
  Started by: vintagengineer in: Electronics in the Workshop
- 6
- 8
- 8 August 2026 at 10:09
  John Haine
- What the hell is going on with the suppliers??? 1 2
  Started by: Hollowpoint in: General Questions
- 19
- 34
- 8 August 2026 at 10:00
  JA
- Sealed Lead-Acid Battery 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 9
- 31
- 8 August 2026 at 07:25
  John Haine
- 2 BA steel nuts
  Started by: vintagengineer in: Materials
- 1
- 1
- 7 August 2026 at 18:18
  vintagengineer
- Sieg X3 Mill Toothed Belt
  Started by: Keith Rogers 2 in: Help and Assistance! (Offered or Wanted)
- 4
- 9
- 7 August 2026 at 11:10
  Keith Rogers 2
- Attempt to fix, or re-purpose, or just scrap?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 14
- 20
- 7 August 2026 at 09:02
  Hollowpoint
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 33
- 7 August 2026 at 08:03
  SteveP
- Carbide tip choice advice info
  Started by: JohnF in: Workshop Tools and Tooling
- 11
- 12
- 6 August 2026 at 23:55
  Vic
- Clarke 0.50HP 2800 rpm motor behaving oddly.
  Started by: Andrew Tinsley in: General Questions
- 9
- 17
- 6 August 2026 at 21:00
  Andrew Tinsley

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies