3-1/2″ gauge “Greene King” build.

3-1/2″ gauge “Greene King” build.

This topic has 5 replies, 5 voices, and was last updated 10 December 2016 at 17:19 by Another JohnS.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
4 December 2016 at 19:41 #269895
Max Simons
Participant
@maxsimons88737
Hello!

This is my first post here! I am a hobby machinist. …..when my wife and son let me have some time to myself. I recently acquired a full set of castings and plans for Martin Evans Greene King 4-6-0 live steam locomotive and tender. I’m fairly new to model engineering and the whole live steam culture. Is there anybody out there who has experience with building castings that are manufactured by reeves? Any tips or pointers?
Advert

4 December 2016 at 19:41 #1572
Max Simons
Participant
@maxsimons88737
5 December 2016 at 08:56 #269948
nigel jones 5
Participant
@nigeljones5
At this scale you can make everything from raw materials. I have built in 31/2, 5 and 71/4 and have never bought a single casting. You may choose to buy wheels as they can be difficult.
5 December 2016 at 09:37 #269955
Chris Evans 6
Participant
@chrisevans6
Welcome along, ask away for any hints and tips. The depth of knowledge on this board will find you an answer.
5 December 2016 at 17:53 #270068
Neil Wyatt
Moderator
@neilwyatt
Welcome to the forum, Max.

Neil
10 December 2016 at 17:19 #271049
Another JohnS
Participant
@anotherjohns
Hi Max;

Where (approximately) are you? Have you been to your local live steam club(s)?

My Tich castings came from Reeves, they were fine, but a couple of decades ago now.

(I think 3-1/2" gauge is the best gauge for me to build in, but nice locomotives are made in all gauges)

John.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 5
- 7
- 2 July 2026 at 19:29
  duncan webster 1
- Gas Tap Valves. Vintage 1 2 3
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 21
- 73
- 2 July 2026 at 19:03
  Robert Atkinson 2
- Running 380V 3-phase motor on 230V 1-phase 1 2 3 4
  Started by: jimalm in: Electronics in the Workshop
- 20
- 84
- 2 July 2026 at 18:41
  not done it yet
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 26
- 59
- 2 July 2026 at 18:38
  howardb
- Clarkson radius grinding attachment
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 3
- 3
- 2 July 2026 at 18:13
  noel shelley
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 1
- 1
- 2 July 2026 at 17:47
  Michael Gilligan
- Lathework for Beginners 1 2 … 4 5
  Started by: Neil Wyatt in: Manual machine tools
- 24
- 111
- 2 July 2026 at 17:36
  Howard Lewis
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 12
- 18
- 2 July 2026 at 17:08
  Howard Lewis
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 117
- 2 July 2026 at 16:49
  jaCK Hobson
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 4
- 6
- 2 July 2026 at 13:47
  David Jupp
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 3
- 6
- 2 July 2026 at 11:53
  Charles Jambon
- Martin Cleeve Swing Clear Retracting Toolholder 1 2
  Started by: Roger Harvey in: Workshop Tools and Tooling
- 18
- 26
- 2 July 2026 at 10:03
  ega
- Replacement belt for Mk1 Clarkson cutter grinder.
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 6
- 8
- 1 July 2026 at 20:53
  Andrew Tinsley
- ultra sonic cleaner
  Started by: Dalboy in: General Questions
- 10
- 13
- 1 July 2026 at 19:59
  Graham Meek
- How to stop juddering
  Started by: Peter Simpson 3 in: Beginners questions
- 7
- 10
- 1 July 2026 at 15:11
  Peter Simpson 3
- Small hobby lathes.
  Started by: activeviii in: General Questions
- 7
- 10
- 1 July 2026 at 12:41
  lukeama123
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 37
- 1 July 2026 at 12:29
  Dave Halford
- Links for Workshop and Model Engineering STLs and other files.
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 9
- 12
- 1 July 2026 at 11:29
  timdotd
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 36
- 1 July 2026 at 10:51
  Graham Meek
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 24
- 40
- 30 June 2026 at 17:41
  Diogenes
- Using VFDs on old motors
  Started by: Andrew Skinner in: Electronics in the Workshop
- 11
- 22
- 30 June 2026 at 17:07
  Robert Atkinson 2
- Bateman Precision Pendulum Clock
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 2
- 2
- 30 June 2026 at 15:02
  John Haine
- DRO instructions
  Started by: Speedy Builder5 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 3
- 30 June 2026 at 12:11
  Speedy Builder5
- How do I learn machining ? 1 2 3 4
  Started by: paul1956 in: Beginners questions
- 32
- 95
- 30 June 2026 at 12:05
  bernard towers
- New here but have the swarf cuts
  Started by: activeviii in: Introduce Yourself – New members start here!
- 1
- 1
- 30 June 2026 at 10:59
  activeviii

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies