As this site seems to now have adverts for Aliexpress then I can’t see why I should not mention the Xuhan brand ones I have been buying via them. They have gone up from the £2 I was paying for a 6mm cutter a couple of years ago to about £5 now but still a reasonable buy for general use coated for steel and uncoated non ferrous cutters.

APT  have always been cheaper than ARC on the small sub 6mm sizes so I use them too plus they do 3-flute that Xuhan don’t do many of. Between the two it’s hard to see a difference in performance and tool life. They

https://xuha-cutting-tool.aliexpress.com/store/5041252?spm=a2g0o.detail.0.0.b381SEUDSEUDZc

Drill Services (Horley) https://www.drill-service.co.uk/

All types of milling cutters and reamers. The common sizes are sensibly priced and they offer a next day delivery (depending on your local post office).

JA

I’ve used Rennie in the past e.g.

Rennie 6mm Carbide 3 flute endmill

Rod

APT also sell carbide tips in two’s to save you having to buy a standard box of ten. Look under “carbide tips for hobby use”, second item down in the left hand menu. Of course they are slightly more expensive per tip but only by a couple of pennies.

I have had some good quality carbide endmills ftom Temu. Very good quality and reasonable price.

The HSS ones have been total rubbish

Jimb

https://www.ewequipment.co.uk/

Look out for frequent sales.  Have used them for some years.