Brass Tube

Brass Tube

This topic has 5 replies, 4 voices, and was last updated 4 January 2017 at 19:34 by Michael Gilligan.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
4 January 2017 at 18:01 #275732
Neil Wyatt
Moderator
@neilwyatt
Seeking 3/8" O/D brass tube with a 1/16" (or 0.065&quot wall diameter.

The usual suspects only seem to stock 0.035" wall tube.

Sadly google gets confused by the fractions as most sites stock 3/8" AND 1/4" OD tube, but with thin walls.

I found one source in the US! There must be a UK source as I have a small piece in my workshop.

Ideally as a cheap (it doesn't need to be super long lasting) alternative to oilite bushes.

Neil
Advert

4 January 2017 at 18:01 #29667
Neil Wyatt
Moderator
@neilwyatt
4 January 2017 at 18:25 #275736
Bazyle
Participant
@bazyle
There are tubes designed to fit into one another – probably what you were finding. If you soldered one inside another using whitemetal if it wore through the bearing properties would improve.
4 January 2017 at 18:29 #275737
Phil P
Participant
@philp
Neil

Macc Models on here have it listed.

https://maccmodels.co.uk/materials-metal/brass-sections/brass-tube/16g-brass-tube/3-8-x-16g-brass-tube.html

Phil
4 January 2017 at 19:25 #275758
Neil Wyatt
Moderator
@neilwyatt
Posted by Phil P on 04/01/2017 18:29:20:

Neil

Macc Models on here have it listed.

https://maccmodels.co.uk/materials-metal/brass-sections/brass-tube/16g-brass-tube/3-8-x-16g-brass-tube.html

Phil

Excellent, thanks Phil

Neil
4 January 2017 at 19:34 #275759
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Neil Wyatt on 04/01/2017 18:01:13:

Seeking 3/8" O/D brass tube with a 1/16" (or 0.065" wall diameter.

.

Might get better results if you specify wall thickness

MichaelG.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Scroll Saw Blades for Steel 1 2
  Started by: James A in: Workshop Tools and Tooling
- 15
- 32
- 16 October 2026 at 17:19
  Emanuel Hernandez
- CAST IRON JOINING
  Started by: ian Holdsworth in: Beginners questions
- 10
- 15
- 16 October 2026 at 17:16
  Mike Crossfield
- Angled d-bit / machinist reamer? 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 12
- 27
- 16 October 2026 at 16:12
  Fulmen
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 4
- 7
- 16 October 2026 at 15:04
  chris1984
- injector operation
  Started by: Garry Coles in: General Questions
- 3
- 3
- 16 October 2026 at 12:11
  Bazyle
- Myford ml7r
  Started by: lug lord in: Introduce Yourself – New members start here!
- 2
- 2
- 16 October 2026 at 12:04
  Bazyle
- Weight of Myford Super 7 / ML7R
  Started by: Andrew Tinsley in: General Questions
- 3
- 5
- 16 October 2026 at 11:47
  peak4
- Coventry die head
  Started by: lug lord in: Workshop Techniques
- 6
- 7
- 16 October 2026 at 10:32
  bernard towers
- Does anyone have any info about these vices 1 2
  Started by: bjcolyer in: Introduce Yourself – New members start here!
- 12
- 26
- 16 October 2026 at 10:20
  bjcolyer
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 8
- 21
- 16 October 2026 at 09:29
  IanT
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 25
- 15 October 2026 at 23:29
  Peter Hoerlein
- ML7 change gear caluclator
  Started by: drnewcomb in: Manual machine tools
- 3
- 3
- 15 October 2026 at 21:11
  peak4
- Lathe turning tool nomenclature
  Started by: JA in: Workshop Tools and Tooling
- 9
- 16
- 15 October 2026 at 19:48
  old mart
- Model Engineering Website
  Started by: Geoff Rogers in: General Questions
- 5
- 8
- 15 October 2026 at 16:14
  JA
- Parkside Electronics
  Started by: Clive Steer in: General Questions
- 8
- 23
- 15 October 2026 at 13:13
  shayodon
- Model Engineer Magazine Collection
  Started by: mfengine1 in: Books
- 11
- 24
- 15 October 2026 at 12:13
  bcaddle62
- John Haining 2″ Ruston
  Started by: Pixel_Porpoise in: Help and Assistance! (Offered or Wanted)
- 2
- 3
- 15 October 2026 at 11:32
  Pixel_Porpoise
- Searching for roller chain with pitch 2.5 mm
  Started by: Werner Habbel in: Hints And Tips for model engineers
- 4
- 6
- 15 October 2026 at 10:16
  Werner Habbel
- Model Engineering Website
  Started by: Neil A in: The Tea Room
- 1
- 1
- 15 October 2026 at 10:03
  Neil A
- Lathe arriving – source some practice materials 1 2
  Started by: starjump in: Beginners questions
- 17
- 34
- 15 October 2026 at 09:48
  starjump
- Greenbat 3 ton battery loco
  Started by: Pippin in: Work In Progress and completed items
- 2
- 3
- 15 October 2026 at 08:52
  Pippin
- Printed circuit boards
  Started by: duncan webster 1 in: Electronics in the Workshop
- 7
- 15
- 14 October 2026 at 21:33
  duncan webster 1
- What Are the Most Practical Ways to Make Manufacturing More Sustainable?
  Started by: andrew998 in: Workshop Techniques
- 6
- 6
- 14 October 2026 at 16:41
  ega
- Home workshop site down?
  Started by: Andrew Tinsley in: General Questions
- 4
- 5
- 14 October 2026 at 16:39
  Brian Baker 2
- Sealant for bolting a dome casting to a model boiler
  Started by: Greensands in: Hints And Tips for model engineers
- 6
- 7
- 14 October 2026 at 15:37
  Derek Drover

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies