1/4 ” Thinwalled Stainless Steel Tubing

1/4 ” Thinwalled Stainless Steel Tubing

This topic has 6 replies, 4 voices, and was last updated 3 November 2016 at 13:41 by Johannes Grabsch.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
3 November 2016 at 12:57 #264573
Johannes Grabsch
Participant
@johannesgrabsch91508
Hallo

Can anybody please name a supplier of 1/4 " Thinwalled Stainless Steel Tubing?

I am looking for 4 pieces 800 or 1000 mm long, to be used in making Superheaters.

Johannes
Advert

3 November 2016 at 12:57 #29647
Johannes Grabsch
Participant
@johannesgrabsch91508
3 November 2016 at 13:10 #264574
JasonB
Moderator
@jasonb
Have you tried MACC? they should be able to cut to length as will M-machine
3 November 2016 at 13:22 #264577
John Baguley
Participant
@johnbaguley78655
I get mine from Southern Temperature Sensors:

http://www.southerntemp.co.uk/

They do much thinner wall tubing (316L) than the ME suppliers in both metric and imperial sizes. They also advertise on Ebay but usually only in short lengths.

Usual disclaimer.

John
3 November 2016 at 13:25 #264579
david homer
Participant
@davidhomer12226
You could try BES Ltd they 1/4" x 20g
3 November 2016 at 13:29 #264580
JasonB
Moderator
@jasonb
Out of interest what actual thickness is it you are after as one mans thin may be anothers thick?

For example the thinnest wall 1/4" tube that Johns supplier lists is as thin as the one done by Macc

Edited By JasonB on 03/11/2016 13:32:00
3 November 2016 at 13:41 #264581
Johannes Grabsch
Participant
@johannesgrabsch91508
Forgot to say: 20 g

Johannes
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Arc’s 25mm indexable end mills…
  Started by: gerry madden in: General Questions
- 3
- 4
- 3 September 2025 at 22:58
  gerry madden
- Chimney turning
  Started by: dave22 in: Beginners questions
- 2
- 4
- 3 September 2025 at 22:39
  noel shelley
- Swing over bed limitation for flywheels
  Started by: Steve Huckins in: General Questions
- 15
- 22
- 3 September 2025 at 21:25
  Engine Builder
- An Unexpected Message
  Started by: Michael Gilligan in: The Tea Room
- 6
- 8
- 3 September 2025 at 21:12
  Michael Gilligan
- Play on warco mini lathe saddle
  Started by: Michael Callaghan in: Manual machine tools
- 4
- 9
- 3 September 2025 at 17:50
  Howard Lewis
- Safe and secure way to suspend a 5″G Tender
  Started by: Greensands in: Locomotives
- 6
- 7
- 3 September 2025 at 14:51
  Nealeb
- Denford Orac refit
  Started by: Richard Evans 2 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 19
- 3 September 2025 at 14:30
  Stuart Smith 5
- design and use of cutting tools
  Started by: john mostyn in: Books
- 8
- 9
- 3 September 2025 at 14:25
  cogdobbler
- Alternatives for a DRO display change
  Started by: John Hinkley in: General Questions
- 8
- 24
- 3 September 2025 at 13:53
  SillyOldDuffer
- What Did You Do Today 2025 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 38
- 244
- 3 September 2025 at 13:05
  Vic
- Vallder CNC
  Started by: Michael Gilligan in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 3 September 2025 at 08:38
  Michael Gilligan
- Big Vise, go big or go home
  Started by: conrod in: Workshop Tools and Tooling
- 6
- 6
- 2 September 2025 at 20:00
  old mart
- Parting off on a mini lathe
  Started by: Andy Brocklehurst in: Beginners questions
- 18
- 25
- 2 September 2025 at 19:43
  old mart
- St Albans Big Show 27 & 28 Sept 25
  Started by: Bazyle in: Exhibitions, Shows and Club Events
- 2
- 3
- 2 September 2025 at 16:25
  Bazyle
- Exeter & District Model Engineers Show – 7 Sept
  Started by: Bazyle in: Exhibitions, Shows and Club Events
- 1
- 1
- 2 September 2025 at 16:22
  Bazyle
- Task Light
  Started by: Vic in: Work In Progress and completed items
- 2
- 3
- 2 September 2025 at 15:15
  Vic
- alchin transfers
  Started by: joseph tatler in: Traction engines
- 4
- 4
- 2 September 2025 at 13:19
  Clive Brown 1
- Watercress Queen
  Started by: Diogenes in: Locomotives
- 3
- 3
- 2 September 2025 at 12:38
  JA
- NU tool milling machine
  Started by: joseph tatler in: Manual machine tools
- 8
- 13
- 2 September 2025 at 10:31
  joseph tatler
- Newbie
  Started by: seanieboy in: Introduce Yourself – New members start here!
- 4
- 4
- 2 September 2025 at 10:25
  Howard Lewis
- Feed Water 1 2
  Started by: Richard Simpson in: General Questions
- 16
- 31
- 2 September 2025 at 09:44
  noel shelley
- Looking for a quality pencil sharpener
  Started by: Greensands in: The Tea Room
- 11
- 13
- 2 September 2025 at 08:56
  Richard Simpson
- Softening epoxy 1 2
  Started by: John Haine in: General Questions
- 23
- 42
- 2 September 2025 at 04:23
  John Haine
- Thread form of medical ‘screws’.
  Started by: JimmieS in: The Tea Room
- 7
- 11
- 1 September 2025 at 20:45
  JimmieS
- Knowledge
  Started by: seanieboy in: Introduce Yourself – New members start here!
- 5
- 5
- 1 September 2025 at 19:39
  Roderick Jenkins

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies