Trying to find 16mm slitting saw arbor for lathe

Trying to find 16mm slitting saw arbor for lathe

Home › Forums › General Questions › Trying to find 16mm slitting saw arbor for lathe

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #23494
    Stevo
    Participant
      @stevo
      #163707
      Stevo
      Participant
        @stevo

        Hi All..

        Ive a couple of slitting saws with 16mm (exact) bore. I'm trying to find an arbor exactly 16mm – all I can find is 5/8 which is too small and the saw runs eccentrically!

        It will need a parallel shank as I use it in a lathe…

        Any help appreciated!

        Steve

        #163708
        roy entwistle
        Participant
          @royentwistle24699

          Steve All due respects but you've got a lathe why can't you make your own ?

          Roy

          #163709
          JasonB
          Moderator
            @jasonb

            RDG do a set of 3 that includes 16mm but they are not that hard to make.

            #163710
            Stevo
            Participant
              @stevo

              I was waiting for that one wink

              Yes I could do of course Roy but not too much time available. I have one of those stepped ones which are really useful but only on an imperial size. If there was one off the shelf for a tenner or so I'll consider that !

              #163711
              Stevo
              Participant
                @stevo

                OK Jason – why didn't I spot those ? Doh..

                #163712
                Michael Gilligan
                Participant
                  @michaelgilligan61133

                  Steve,

                  These folks look promising … But I doubt if they're a Tenner.

                  For occasional use, I would be tempted to make some oversize blanks and skim one [to size and concentricity] as and when required.

                  MichaelG.

                  .

                  Edited slightly, having now seen the other postings.

                  Edited By Michael Gilligan on 16/09/2014 19:36:43

                Viewing 7 posts - 1 through 7 (of 7 total)
                • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                Latest Replies

                Home › Forums › General Questions › Topics

                Viewing 25 topics - 1 through 25 (of 25 total)
                Viewing 25 topics - 1 through 25 (of 25 total)

                View full reply list.