Congrats for issue 4467

Congrats for issue 4467

Home Forums General Questions Congrats for issue 4467

Viewing 16 posts - 1 through 16 (of 16 total)
  • Author
    Posts
  • #22905
    Springbok
    Participant
      @springbok

      Who deleted the first posting

      #132998
      Springbok
      Participant
        @springbok

        Which moderator hates ME so much that they would delete my posting, I did not know that ME Moderators lived in a Hitler regime…
        Now I was thanking Dianne and for her team for a very well thought out and superb issue, Great articles a wonderful mix of articles and well presented. I know that I have been a critic of content in the past but this was superb
        Well Done Dianne and team..

        If any so called Moderator or what you wish to call yourself deletes this I will track you down and get you de-moderated. OUCH sounds painfull.
        I will now get the screams "It was not me"
        Bob

        #133002
        David Clark 13
        Participant
          @davidclark13

          Do You mean ME (you) rather than Model Engineer or do you mean Model Engineer rather then ME (you)?

          #133003
          John Stevenson 1
          Participant
            @johnstevenson1

            If he means you it could be ME but then again if it wasn't ME it must have been you.

            #133004
            ASF
            Participant
              @asf

              The topic was here earlier on Bob, but your post was not and then someone replied and just put a question mark up (in reply) . So your post didnt make it onto the site but your topic did …

              #133019
              Diane Carney
              Moderator
                @dianecarney30678

                I PM'd you Bob. It was deleted in error this morning … bit of a slip-up you understand.

                Thank you for putting it back. I am very glad you like this issue. It is good to be appreciated sometimes.

                One person here thinks ME is going to the dogs and makes a point of saying so to anyone who will listen (never directly to me of course) but I genuinely think that person is in the minority judging by the unsolicited feedback I get … and fortunately not many people do listen anyway – ha ha.

                There's an awful lot of thought goes into planning each issue these days. I am very grateful for some terrific writers and the work of our designer, Yvette. I think 4467 was a particularly nice cover. What do others think?

                Diane

                #133022
                Another JohnS
                Participant
                  @anotherjohns

                  Diane;

                  Still waiting for 4466 – 4467 is a couple of weeks away from "touchdown".

                  I really enjoy sitting down (not on the computer) and reading Model Engineer; as I've said before, and I'll say again, I think you (plural) are doing a great job on this magazine.

                  John A. Stewart

                  Ottawa.

                  #133026
                  Springbok
                  Participant
                    @springbok

                    DC1
                    ME is just shorthand for Model Engineer.
                    John who is He I have a name

                    Yes thought also the front cover was great nice one of father and son Would have loved to get up to Leyland
                    but living in deepest zider country and over 70 it would be a bit of a struggle.
                    Keep up the good work and ignore the "Plebs"

                    Bob

                    #133027
                    Danny M2Z
                    Participant
                      @dannym2z
                      Posted by Diane Carney on 18/10/2013 22:16:20:

                      One person here thinks ME is going to the dogs and makes a point of saying so to anyone who will listen (never directly to me of course) but I genuinely think that person is in the minority judging by the unsolicited feedback I get … and fortunately not many people do listen anyway – ha ha.

                      Hi Diane. That's why I thought we had the 'Ignore Member' button.

                      (Only had to use it once, and that was a spammer)

                      Keep up the good work!

                      Regards from the land of the kangaroo

                      * Danny M *

                      ps. many websites have a 'Smiley's Off' button… any chance?

                      #133031
                      Ian S C
                      Participant
                        @iansc

                        Mines not here yet, will be in a day or so. People have been bagging ME since before day one in 1898, back then some gave it a matter of months till it folded, we're still waiting, and might still be waiting in another hundred years. Ian S C

                        #133035
                        Danny M2Z
                        Participant
                          @dannym2z
                          Posted by Ian S C on 19/10/2013 09:26:51:

                          Mines not here yet, will be in a day or so. People have been bagging ME since before day one in 1898, back then some gave it a matter of months till it folded, we're still waiting, and might still be waiting in another hundred years.

                          G'day from over the ditch Ian.

                          That would make M.E. one of the longest running publications in the world. Not bad!

                          Regards from the land of the kangaroo.

                          * Danny M *

                          ps. 'Bagging ME since 1898' Do I understand that you are now 115 years old or is it just the syntax of our strange language? wink ' Lol, finally found a use for 'Smileys'

                          Edited By Danny M2Z on 19/10/2013 09:54:48

                          #133048
                          Sub Mandrel
                          Participant
                            @submandrel

                            > That would make M.E. one of the longest running publications in the world. Not bad!

                            There are plenty of UK publications over 200 years old, mostly newspapers.

                            Neil

                            #133057
                            Bazyle
                            Participant
                              @bazyle

                              Since the subject of front covers has been raised and I have just been looking up old articles can I make a few comments.

                              In the past some issues have had the date completely missing off the front cover!. You seem to be ok recently but please make sure it never ever happens again.
                              Next please give some more consideration to the readability of the number/date. It is often plonked over a bit of photo often making it very hard to read. Last issue had the Model Engineer title over a plain background section so the date details were nice and clear but a few issues back the mag was renamed "Model Enginee". that wasn't cool or trendy it was sloppy.
                              The top banner "The original…etc" is completely and utterly pointless. Issue number in the 4 thousands says it all. Why not move the number/date up there in BIG type so that in a pile of issues it can easily be seen without pulling the mag halfway out.

                              Finally after browsing a few dozen back copies I have a plie of them to refile. It would really really help if every issue had a small coloured tabat the spine half an inch high that moved up one unit with each issue and changed colour with each volume. Sorting would then be easy by colour and position, missing or miss-filed issues would be easy to spot.

                              #133068
                              Sub Mandrel
                              Participant
                                @submandrel

                                The cover date has a big influence of how long sellers display the issue. the mag got seriously out of sync several years ago and they wouldn't put the date on the front until it got back to schedule, otherwise it would have come off the shelves before it got to them, if you know what I mean!

                                > a small coloured tab at the spine half an inch high that moved up one unit with each issue

                                Nice idea. perhaps two colours, one for odd and one for even issues, to help with tracking alternate fortnight series.

                                Neil

                                #133077
                                JasonB
                                Moderator
                                  @jasonb

                                  Just don't make it a dark green tabwink 2

                                  #133094
                                  Diane Carney
                                  Moderator
                                    @dianecarney30678
                                    Posted by Stub Mandrel on 19/10/2013 12:36:58:

                                    > That would make M.E. one of the longest running publications in the world. Not bad!

                                    There are plenty of UK publications over 200 years old, mostly newspapers.

                                    Neil

                                    I am led to believe that Model Engineer is the olderst hobby magazine in the world. I have never had it proved otherwise. Does anyone know any different?

                                    Diane

                                  Viewing 16 posts - 1 through 16 (of 16 total)
                                  • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                                  Latest Replies

                                  Home Forums General Questions Topics

                                  Viewing 25 topics - 1 through 25 (of 25 total)
                                  Viewing 25 topics - 1 through 25 (of 25 total)

                                  View full reply list.