Elliott M10 Shaper rebuild – new drive shaft needed

This topic has 2 replies, 2 voices, and was last updated 31 October 2015 at 09:32 by Brian Wood.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
30 October 2015 at 23:40 #209975
mick vann
Participant
@mickvann94362
Hi Chaps, has anyone rebuilt a Elliott M10 shaper, i need to remove the clutch drive shaft and was looking for the best way to go about it as it is bent.

Does anyone have a spare ?

TIA Mick
Advert

30 October 2015 at 23:40 #12570
mick vann
Participant
@mickvann94362
Drive shaft removal
31 October 2015 at 09:32 #210005
Brian Wood
Participant
@brianwood45127
Hello Mick,

If you need drawings to show you how it is fitted, I can help there, but not with a replacement shaft I'm afraid. Send me a PM if that would be helpful

Shafts aren't difficult to straighten, for minor bending at least, using a wooden block and lump hammer with the shaft supported on two lumps of timber. with Vee notches cut into them.

Progress can be readily checked by rolling the shaft round in two vee blocks and then knocking out the high spot accordingly

Regards

Brian
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 17
- 24
- 5 July 2026 at 22:15
  george baker 1
- Laser centre finder 1 2
  Started by: Buffer in: General Questions
- 16
- 33
- 5 July 2026 at 21:54
  Vic
- Brass covered steel
  Started by: Dougie Swan in: General Questions
- 9
- 10
- 5 July 2026 at 20:43
  Dougie Swan
- Accolade
  Started by: Bill Dawes in: General Questions
- 7
- 7
- 5 July 2026 at 20:09
  noel shelley
- Testing Single Point Thread Fitment 1 2
  Started by: berwick in: Beginners questions
- 17
- 30
- 5 July 2026 at 16:44
  Michael Gilligan
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 41
- 5 July 2026 at 15:45
  Nick Welburn
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 51
- 5 July 2026 at 13:22
  southernchap
- Flat Surface 1 2 3
  Started by: COLIN MARTIN 2 in: Materials
- 32
- 56
- 5 July 2026 at 13:15
  southernchap
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 9
- 10
- 5 July 2026 at 12:57
  Martin Johnson 1
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 8
- 18
- 5 July 2026 at 10:29
  John Haine
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 5
- 9
- 5 July 2026 at 10:06
  michael m
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 5
- 12
- 4 July 2026 at 20:19
  Bill Phinn
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 324
- 4 July 2026 at 16:46
  Phil Whitley
- NPT thread
  Started by: Bill Dawes in: General Questions
- 8
- 11
- 4 July 2026 at 15:46
  Dave Halford
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 26
- 4 July 2026 at 15:12
  SteveP
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 118
- 4 July 2026 at 13:27
  JasonB
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 6
- 9
- 3 July 2026 at 22:23
  Mark Rand
- Leadscrew Handwheel for Warco WM180
  Started by: James A in: Manual machine tools
- 9
- 17
- 3 July 2026 at 20:45
  Andy Stopford
- Clarkson radius grinding attachment
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 5
- 10
- 3 July 2026 at 19:28
  Clive Foster
- Gas Tap Valves. Vintage 1 2 3 4
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 22
- 88
- 3 July 2026 at 18:36
  duncan webster 1
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 28
- 65
- 3 July 2026 at 17:20
  vintagengineer
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 3
- 8
- 3 July 2026 at 10:54
  bernard towers
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 58
- 2 July 2026 at 22:45
  dean clarke 2
- Running 380V 3-phase motor on 230V 1-phase 1 2 3 4
  Started by: jimalm in: Electronics in the Workshop
- 20
- 85
- 2 July 2026 at 22:38
  Vic
- Lathework for Beginners 1 2 … 4 5
  Started by: Neil Wyatt in: Manual machine tools
- 24
- 111
- 2 July 2026 at 17:36
  Howard Lewis

Elliott M10 Shaper rebuild – new drive shaft needed

Elliott M10 Shaper rebuild – new drive shaft needed

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies