inverted hydraulic jack press

inverted hydraulic jack press

This topic has 5 replies, 3 voices, and was last updated 5 January 2013 at 10:44 by Paul Lousick.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
3 January 2013 at 01:11 #107816
russell
Participant
@russell
this article concluded 'to be continued', but 3 mags later, still no sign. A bit disappointing when such a simple project is split over 2 months, when 'copper mining in Spain', has 3 consecutive issues so far. Interesting though it may be, it is not model engineering.

Is the press article 'in the bag' so to speak, or just a maybe?

regards

russ
Advert

3 January 2013 at 01:11 #12057
russell
Participant
@russell
ME4443, Nov 2012
3 January 2013 at 09:03 #107831
David Clark 13
Participant
@davidclark13
Hi There

I will check back to see what is happening.

Sounds like it may have been missed or wrong ending added.

regards David

Edited By David Clark 1 on 03/01/2013 09:03:43
3 January 2013 at 09:06 #107832
David Clark 13
Participant
@davidclark13
Hi There

It is finished.

Should not have had to be continued on it.

regards David
3 January 2013 at 09:44 #107836
russell
Participant
@russell
i can breathe again then!

i had wondered if perhaps there was material around making tooling for it as a follow-on.

perhaps an opportunity for a budding writer…

thanks for checking DC1.

-russ
5 January 2013 at 10:44 #107950
Paul Lousick
Participant
@paullousick59116
I have not seen the hydraulic press article in ME but have built one of my own from a 12 tonne pipe bender which I purchased for $80. The press will work vertically in the inverted position or horizontally. Shown below bending wheel spokes for my 6" tractin engine.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- QCTP for chester lathe 1 2
  Started by: Chris12 in: Beginners questions
- 11
- 26
- 24 August 2025 at 11:11
  dk0
- Progress no.1 restoration
  Started by: flyingsailor in: Workshop Tools and Tooling
- 6
- 7
- 24 August 2025 at 11:06
  Michael Gilligan
- Material advice
  Started by: tobyonekenobi in: Materials
- 10
- 21
- 24 August 2025 at 10:57
  tobyonekenobi
- A4 stainless
  Started by: David Ambrose in: Materials
- 12
- 19
- 24 August 2025 at 10:13
  Martin Kyte
- Model Aircraft Engine
  Started by: Alan Charleston in: Suggested Online Resources
- 2
- 2
- 24 August 2025 at 09:38
  Michael Gilligan
- Blackgates 3 Way Toolpost Casting
  Started by: John McCulla in: Materials
- 11
- 17
- 24 August 2025 at 07:09
  JasonB
- THE MAUDSLAY TABELE ENGINE
  Started by: sivtek1 in: Introduce Yourself – New members start here!
- 2
- 2
- 24 August 2025 at 06:50
  JasonB
- Smart & Brown Model L lathe help required
  Started by: AJAX in: Manual machine tools
- 1
- 4
- 23 August 2025 at 21:45
  AJAX
- Phone Phreaking
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 11
- 13
- 23 August 2025 at 20:04
  Marcus Bowman
- This weeks oddity!
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 4
- 5
- 23 August 2025 at 17:29
  Martin King 2
- Asong power feed?
  Started by: Hollowpoint in: General Questions
- 5
- 6
- 23 August 2025 at 16:55
  Stuart Smith 5
- New member, progress no.1 rest
  Started by: flyingsailor in: Introduce Yourself – New members start here!
- 5
- 7
- 23 August 2025 at 16:11
  flyingsailor
- My week this week! My workshop videos 1 2 … 11 12
  Started by: Phil Whitley in: The Tea Room
- 16
- 297
- 23 August 2025 at 16:05
  Phil Whitley
- Yet another scam
  Started by: Dell in: The Tea Room
- 9
- 13
- 23 August 2025 at 11:08
  Howard Lewis
- Taylor Hobson cutter grinder modificaton 1 2
  Started by: David George 1 in: Workshop Tools and Tooling
- 9
- 39
- 23 August 2025 at 08:43
  Andrew Crow
- Museum donation
  Started by: Stephen Wessel 1 in: Introduce Yourself – New members start here!
- 2
- 2
- 22 August 2025 at 20:36
  Bazyle
- Casting – off center hole correction
  Started by: colin hamilton in: Workshop Techniques
- 9
- 10
- 22 August 2025 at 17:38
  colin hamilton
- Granville lathe leadscrew change wheel
  Started by: JACK SIDEBOTHAM in: Help and Assistance! (Offered or Wanted)
- 10
- 17
- 22 August 2025 at 17:07
  Howard Lewis
- wood working
  Started by: Danni Burns in: Beginners questions
- 9
- 12
- 22 August 2025 at 15:55
  Danni Burns
- 3″ Castings – Help/Advice needed
  Started by: Andy Porter 1 in: Traction engines
- 4
- 6
- 22 August 2025 at 13:15
  JasonB
- AI ads
  Started by: Ian Parkin in: The Tea Room
- 5
- 5
- 22 August 2025 at 13:00
  jimmy b
- 1″ Minnie Traction Engine
  Started by: milburyring@btinternet.com in: Traction engines
- 3
- 8
- 22 August 2025 at 08:53
  milburyring@btinternet.com
- Solar panel
  Started by: duncan webster 1 in: Electronics in the Workshop
- 8
- 13
- 22 August 2025 at 07:19
  Michael Gilligan
- The stand alone weight for tower clock 1 2
  Started by: dk0 in: Clocks and Scientific Instruments
- 12
- 36
- 21 August 2025 at 23:59
  Clive Steer
- Install & commission of a Chester Cub 630 (Warco GH750) 1 2 3
  Started by: Calum in: Manual machine tools
- 22
- 74
- 21 August 2025 at 21:52
  noel shelley

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies