V-Blocks

V-Blocks

This topic has 8 replies, 6 voices, and was last updated 2 August 2017 at 09:41 by mechman48.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
1 August 2017 at 20:28 #309826
Nige
Participant
@nige81730
This matched pair of Mitutoyo V-Blocks are something else I inherited along with the ML4……. desirable things to keep I'm guessing ?

Edited By Nige on 01/08/2017 20:29:19
Advert

1 August 2017 at 20:28 #18603
Nige
Participant
@nige81730
1 August 2017 at 20:49 #309833
JasonB
Moderator
@jasonb
Yep
1 August 2017 at 21:16 #309845
Nige
Participant
@nige81730
I nearly sold them on eBay.
1 August 2017 at 21:50 #309861
Neil Wyatt
Moderator
@neilwyatt
Matching serial numbers even
1 August 2017 at 21:51 #309864
Nige
Participant
@nige81730
Yep 😊
1 August 2017 at 22:45 #309874
Nick_G
Participant
@nick_g
.

I have the same set.

Paid £25 for them on ebay and look as if they have never been used. – They still haven't been. But for that amount they are worth having and will be invaluable at some point in the future I imagine.

Dread to think the original retail cost.

Nick
1 August 2017 at 23:58 #309884
Howard Lewis
Participant
@howardlewis46836
A matched pair of good quality Vee Blocks, c/w clamps.

Definitely KEEP!. At some future time, you will find them invaluable, either for work holding or for for measuring.

Take care of them!

Howard
2 August 2017 at 09:41 #309933
mechman48
Participant
@mechman48
KEEP!… at £25 that's a good bargain … have a look see at new prices…

https://www.cromwell.co.uk/…/vee-blocks…/181-902…181-902-v-block.

uk.rs-online.com › Home › Tools › Clamps & Vices › V Blocks

George.
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Plain bearing speeds
  Started by: zytoooh in: General Questions
- 3
- 3
- 26 July 2025 at 08:59
  Lee Rogers
- Calculation the deflection of a box section steel beam supported at each end
  Started by: Greensands in: Help and Assistance! (Offered or Wanted)
- 7
- 9
- 26 July 2025 at 08:42
  Nicholas Farr
- Reel repair
  Started by: Andy Sproule in: General Questions
- 8
- 9
- 26 July 2025 at 07:27
  renardiere7
- Foru-Way Toolpost Question
  Started by: Nigel Graham 2 in: Workshop Tools and Tooling
- 5
- 13
- 26 July 2025 at 07:14
  Diogenes
- Model Engine running just off a naked flame 1 2
  Started by: Blue Heeler in: Stationary engines
- 10
- 33
- 26 July 2025 at 06:30
  Blue Heeler
- Track my loco.
  Started by: Thomas Clarke in: General Questions
- 9
- 12
- 26 July 2025 at 00:33
  Paul Lousick
- Arc Euro Trade Ltd. 1 2 3
  Started by: Ketan Swali in: General Questions
- 46
- 51
- 25 July 2025 at 23:30
  paul rayner
- Adcock And Shipley vertical milling head – worth anything?
  Started by: ell81 in: General Questions
- 3
- 3
- 25 July 2025 at 23:25
  Bazyle
- Round Bar Bender
  Started by: Trevor Howley in: Workshop Tools and Tooling
- 8
- 18
- 25 July 2025 at 20:16
  Trevor Howley
- Electroplating questions
  Started by: Baldric in: Help and Assistance! (Offered or Wanted)
- 4
- 6
- 25 July 2025 at 19:33
  bernard towers
- Instrument/DTI repair
  Started by: Lee Reynolds 1 in: Help and Assistance! (Offered or Wanted)
- 6
- 11
- 25 July 2025 at 19:23
  Dave S
- 7MM Diameter Drills
  Started by: KEITH BEAUMONT in: The Tea Room
- 11
- 18
- 25 July 2025 at 18:31
  Howard Lewis
- Got some gear and some idea!
  Started by: zytoooh in: Introduce Yourself – New members start here!
- 8
- 15
- 25 July 2025 at 17:47
  Charles Lamont
- Yet another scam
  Started by: Dell in: The Tea Room
- 6
- 7
- 25 July 2025 at 13:22
  Nigel Graham 2
- Colchester Master Mk1 lifting + moving advice 1 2
  Started by: choochoo_baloo in: Manual machine tools
- 17
- 40
- 25 July 2025 at 12:00
  Mark Hall
- My vise isn’t at 90 degrees 1 2
  Started by: moonman in: Beginners questions
- 18
- 30
- 25 July 2025 at 11:51
  Bazyle
- How to sharpen expanding reamer blades & how to adjust them?
  Started by: Grindstone Cowboy in: Beginners questions
- 7
- 9
- 25 July 2025 at 11:35
  Grindstone Cowboy
- Boiler Design – issue 4765 1 2 … 8 9
  Started by: Charles Lamont in: Model Engineer & Workshop
- 27
- 221
- 25 July 2025 at 02:58
  MEinThailand
- MEW Workshop Tales Artie Moore and Titanic 1 2 3 4
  Started by: julian atkins in: Model Engineer & Workshop
- 14
- 85
- 25 July 2025 at 00:11
  julian atkins
- Calling all Little John and other Raglan users
  Started by: David Senior in: General Questions
- 7
- 23
- 24 July 2025 at 23:14
  Howard Lewis
- Hopeless…Alibre Ass 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 7
- 50
- 24 July 2025 at 22:45
  Nigel Graham 2
- Riser design – issue 4767
  Started by: Andy Stopford in: Model Engineer & Workshop
- 6
- 9
- 24 July 2025 at 22:18
  noel shelley
- Pipe bending by hand versus pipe bending tools
  Started by: Greensands in: Workshop Tools and Tooling
- 7
- 7
- 24 July 2025 at 21:13
  Nigel Graham 2
- gear cutters and compatability to cut gears just out of their range
  Started by: bricky in: Workshop Techniques
- 3
- 5
- 24 July 2025 at 20:06
  bricky
- Herbert B drill information?
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 5
- 14
- 24 July 2025 at 19:00
  Oily Rag

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies