Progress…

Progress…

This topic has 6 replies, 4 voices, and was last updated 23 November 2022 at 13:06 by UncouthJ.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
22 November 2022 at 19:34 #622237
UncouthJ
Participant
@uncouthj
Workshop Phase Two complete.

Mill arrived today…

WOOHOO!
Advert

22 November 2022 at 19:34 #20856
UncouthJ
Participant
@uncouthj
22 November 2022 at 19:35 #622239
UncouthJ
Participant
@uncouthj
Ignore the 'not my problem' half of the garage!

😂🤣😂🤣😂🤣😂🤣
22 November 2022 at 22:32 #622259
Steviegtr
Participant
@steviegtr
Who's a happy boy then.

Steve.
23 November 2022 at 09:09 #622290
Chris Evans 6
Participant
@chrisevans6
Very nice and you do look happy. I doubt you will keep the oil cans on that nice toolbox for long, if they are like mine they will leak and be messy. Enjoy the mill.
23 November 2022 at 10:50 #622310
SillyOldDuffer
Moderator
@sillyoldduffer
Posted by UncouthJ on 22/11/2022 19:35:38:

Ignore the 'not my problem' half of the garage!

😂🤣😂🤣😂🤣😂🤣

Well I like it – thought I'd found a fellow spirit! I claim a tidy workshop to be the sign of a sick mind, but I would say that wouldn't I!

Dave
23 November 2022 at 13:06 #622333
UncouthJ
Participant
@uncouthj
Over the bloody moon!

The oil cans are getting a bit clammy as it happens. I'll stick them back down the side, cheers for the heads up.

I'm not the tidiest creature by any stretch but I do find comfort in a well knolled tool box.

J
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 3
- 7
- 2 July 2026 at 23:57
  Tony Ray
- Gas Tap Valves. Vintage 1 2 3 4
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 21
- 79
- 2 July 2026 at 23:23
  Bill Phinn
- Clarkson radius grinding attachment
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 3
- 5
- 2 July 2026 at 22:51
  Andrew Tinsley
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 58
- 2 July 2026 at 22:45
  dean clarke 2
- Running 380V 3-phase motor on 230V 1-phase 1 2 3 4
  Started by: jimalm in: Electronics in the Workshop
- 20
- 85
- 2 July 2026 at 22:38
  Vic
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 27
- 60
- 2 July 2026 at 22:09
  vintagengineer
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 6
- 10
- 2 July 2026 at 22:08
  duncan webster 1
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 1
- 1
- 2 July 2026 at 17:47
  Michael Gilligan
- Lathework for Beginners 1 2 … 4 5
  Started by: Neil Wyatt in: Manual machine tools
- 24
- 111
- 2 July 2026 at 17:36
  Howard Lewis
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 12
- 18
- 2 July 2026 at 17:08
  Howard Lewis
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 117
- 2 July 2026 at 16:49
  jaCK Hobson
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 4
- 6
- 2 July 2026 at 13:47
  David Jupp
- Martin Cleeve Swing Clear Retracting Toolholder 1 2
  Started by: Roger Harvey in: Workshop Tools and Tooling
- 18
- 26
- 2 July 2026 at 10:03
  ega
- Replacement belt for Mk1 Clarkson cutter grinder.
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 6
- 8
- 1 July 2026 at 20:53
  Andrew Tinsley
- ultra sonic cleaner
  Started by: Dalboy in: General Questions
- 10
- 13
- 1 July 2026 at 19:59
  Graham Meek
- How to stop juddering
  Started by: Peter Simpson 3 in: Beginners questions
- 7
- 10
- 1 July 2026 at 15:11
  Peter Simpson 3
- Small hobby lathes.
  Started by: activeviii in: General Questions
- 7
- 10
- 1 July 2026 at 12:41
  lukeama123
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 37
- 1 July 2026 at 12:29
  Dave Halford
- Links for Workshop and Model Engineering STLs and other files.
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 9
- 12
- 1 July 2026 at 11:29
  timdotd
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 36
- 1 July 2026 at 10:51
  Graham Meek
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 24
- 40
- 30 June 2026 at 17:41
  Diogenes
- Using VFDs on old motors
  Started by: Andrew Skinner in: Electronics in the Workshop
- 11
- 22
- 30 June 2026 at 17:07
  Robert Atkinson 2
- Bateman Precision Pendulum Clock
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 2
- 2
- 30 June 2026 at 15:02
  John Haine
- DRO instructions
  Started by: Speedy Builder5 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 3
- 30 June 2026 at 12:11
  Speedy Builder5
- How do I learn machining ? 1 2 3 4
  Started by: paul1956 in: Beginners questions
- 32
- 95
- 30 June 2026 at 12:05
  bernard towers

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies