Plans for Centre Finder Wobbler tool

[John CoatesParticipant @johncoates48577]

Just found and read MEW 43 and that's the one I recalled with the wiggler set in silicone sealant inside some box section

John

[Jerry CashmanParticipant @jerrycashman49324]

Rolls-Royce aero engine ball joints –

Way cool

[Ian S CParticipant @iansc]

I use the same as John, except that I have my DTI clamped in the tool post. Ian S C

[Phil AshmanParticipant @philashman88468]

Mine's similar to John's too, except the needle goes through a rubber plug cut from a soft pencil eraser. Then you can push the needle through and vary the ratio between the long and short lengths.

Phil

[Author]

Posts