Painting machine tools, cannot find thread

Painting machine tools, cannot find thread

This topic has 2 replies, 2 voices, and was last updated 10 June 2025 at 02:02 by Wade Beatty.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
9 June 2025 at 00:37 #802141
Wade Beatty
Participant
@wadebeatty78296
Good evening,

I read a very long and complete thread on Model-Engineer regarding painting of machine tools. I have used various searches and cannot locate it. Can anyone point me towards it?

Thanks and regards,

Wade
Advert

9 June 2025 at 09:08 #802157
Michael Gilligan
Participant
@michaelgilligan61133
Might it be this one:

https://www.model-engineer.co.uk/forums/topic/centec-2b-mill-rebuild/

?

MichaelG.
10 June 2025 at 02:02 #802249
Wade Beatty
Participant
@wadebeatty78296
Thanks for the replies, I found the thread that I was looking for at

https://forum.zerspanungsbude.net/viewtopic.php?f=36& t=79008.

You can click on translate from German to English
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Which lubricator do I need
  Started by: Michael Callaghan in: Locomotives
- 3
- 8
- 27 July 2025 at 18:32
  duncan webster 1
- Clock gear cutting needed or advice in setting up from scratch.
  Started by: mccormackclockrepairs in: Introduce Yourself – New members start here!
- 9
- 15
- 27 July 2025 at 18:11
  mccormackclockrepairs
- 2 6 2 model steam train
  Started by: nickbgood25 in: Introduce Yourself – New members start here!
- 1
- 1
- 27 July 2025 at 18:01
  nickbgood25
- How to balance a cup grinding wheel
  Started by: Clive B in: Workshop Tools and Tooling
- 3
- 3
- 27 July 2025 at 17:29
  John Purdy
- Instrumatic Hardness Tester
  Started by: Roderick Jenkins in: Help and Assistance! (Offered or Wanted)
- 2
- 3
- 27 July 2025 at 17:06
  Roderick Jenkins
- Simple chuck/faceplate threaded mount for mill table
  Started by: Peter Cook 6 in: Workshop Tools and Tooling
- 5
- 10
- 27 July 2025 at 16:12
  Peter Cook 6
- Amadeal lathes – Any good?? 1 2
  Started by: Tim Sallows in: Workshop Tools and Tooling
- 18
- 34
- 27 July 2025 at 16:06
  moonman
- Adcock And Shipley vertical milling head – worth anything?
  Started by: ell81 in: General Questions
- 3
- 4
- 27 July 2025 at 15:53
  ell81
- smokeless cutting oil
  Started by: Chris12 in: General Questions
- 9
- 14
- 27 July 2025 at 15:49
  Chris12
- Thread restorers
  Started by: old fool in: The Tea Room
- 3
- 4
- 27 July 2025 at 15:16
  Clive Foster
- Smart Meter Change-over Problems
  Started by: Alistair Robertson 1 in: The Tea Room
- 2
- 2
- 27 July 2025 at 14:27
  old fool
- motor and switch wiring Myford ML7
  Started by: 1957jmh in: Workshop Tools and Tooling
- 7
- 14
- 27 July 2025 at 13:56
  1957jmh
- Yet another scam
  Started by: Dell in: The Tea Room
- 7
- 8
- 27 July 2025 at 13:11
  old fool
- Recycling UK
  Started by: Speedy Builder5 in: The Tea Room
- 12
- 13
- 27 July 2025 at 13:08
  larry phelan 1
- Model Engine running just off a naked flame 1 2
  Started by: Blue Heeler in: Stationary engines
- 10
- 37
- 27 July 2025 at 13:08
  JasonB
- High strength 4mm steel? 1 2
  Started by: iansoady in: Materials
- 20
- 32
- 27 July 2025 at 12:46
  iansoady
- Record 74 auto vice
  Started by: Danni Burns in: Workshop Tools and Tooling
- 9
- 21
- 27 July 2025 at 10:21
  tomread12
- Plain bearing speeds
  Started by: zytoooh in: General Questions
- 11
- 13
- 26 July 2025 at 22:44
  Nigel Graham 2
- Foru-Way Toolpost Question
  Started by: Nigel Graham 2 in: Workshop Tools and Tooling
- 6
- 15
- 26 July 2025 at 22:04
  Nigel Graham 2
- Boxford STS 10 30 weights
  Started by: PutneyChap in: Manual machine tools
- 4
- 6
- 26 July 2025 at 20:04
  Mark Hall
- Bridgeport ways and wear
  Started by: inline in: Manual machine tools
- 8
- 19
- 26 July 2025 at 17:53
  ryan.carter848
- Lathe index tips
  Started by: petro1head in: General Questions
- 9
- 21
- 26 July 2025 at 13:16
  JasonB
- John Wilding turret clock escapement wheel
  Started by: Andy Freeman 1 in: Clocks and Scientific Instruments
- 2
- 3
- 26 July 2025 at 10:27
  bernard towers
- Reel repair
  Started by: Andy Sproule in: General Questions
- 8
- 10
- 26 July 2025 at 10:20
  Andy Sproule
- Arc Euro Trade Ltd. 1 2 3
  Started by: Ketan Swali in: General Questions
- 46
- 52
- 26 July 2025 at 09:57
  Ketan Swali

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies