The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Introduce Yourself – New members start here! › Making a start
Hi all! I have inherited a Myford Super7 that I am in the process of getting running. Also an early M7 that has been completely stripped down that I intend to rebuild. I dare say I'm going to have lots of questions along the way.
Welcome James, enjoy your new found hobby.
Snap, well almost. I used to be an engineer years ago, last year I bought a Chester DB10, Last week I inherited a Myford ML7 in very good condition.
Welcome to what I believe is the most helpful forum on tinterweb.
Ian
Hello James,
Welcome aboard the forum. You can expect lots of help here.
Neil
It is possible that others, near to you, would give some practical help, if they knew roughly where you are located.
But Welcome, anyway. You will find helpful advice on here; and learn a lot by spending hours reading interesting threads.
Howard
Home › Forums › Introduce Yourself – New members start here! › Topics
Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
seemack
Started by: Windy in: The Tea Room
Windy
Started by: Bill Davies 2 in: The Tea Room
howardb
Started by: Peter Simpson 3 in: Beginners questions
interferencefit
Started by: interferencefit in: Beginners questions
Clive Brown 1
Started by: old mart in: The Tea Room
Andy Stopford
Started by: Andrew Tinsley in: General Questions
Mark Rand
Started by: Thomas Wilshaw in: Workshop Tools and Tooling
Pete
Started by: Phil Whitley in: The Tea Room
Phil Whitley
Started by: Ronald Wagner in: Model Engineer & Workshop
duncan webster 1
Started by: JA in: The Tea Room
ega
Started by: Neil A in: The Tea Room
JA
Started by: Bill Phinn in: Workshop Tools and Tooling
Howard Lewis
Started by: Robin Graham in: The Tea Room
Michael Gilligan
Started by: Speedy Builder5 in: Workshop Techniques
Started by: bobwells72 in: Introduce Yourself – New members start here!
noel shelley
Started by: martynt50 in: Materials
Started by: duncan webster 1 in: The Tea Room
Started by: gary in: Traction engines
gary
Started by: Peter Cook 6 in: Workshop Tools and Tooling
Started by: JasonB in: Stationary engines
JasonB
Started by: Chris V in: General Questions
Started by: JA in: Website Questions, Comments, and Suggestions
Nigel Graham 2
Started by: alexcook in: General Questions
alexcook
Started by: AJW in: Workshop Tools and Tooling
View full reply list.