Machine screw manufacture

Machine screw manufacture

This topic has 4 replies, 4 voices, and was last updated 21 July 2022 at 22:05 by JohnF.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
21 July 2022 at 17:17 #606801
phill reynolds
Participant
@phillreynolds59159
Hi, does anyone know of anyone who can turn some Machine screws in Brass? I have some old ones which has been damaged, im looking for someone to make 10 new ones. they are from an old antique safe, short stumpy flat heads. Thanks in advance
Advert

21 July 2022 at 17:17 #41296
phill reynolds
Participant
@phillreynolds59159
Looking for small number of odd Machine screws to be made
21 July 2022 at 18:59 #606815
bernard towers
Participant
@bernardtowers37738
dimensions, thread and a picture might help
21 July 2022 at 21:28 #606837
Robert Butler
Participant
@robertbutler92161
Posted by bernard towers on 21/07/2022 18:59:32:

dimensions, thread and a picture might help

No keep it simple, guess work is far more fun.

Robert Butler
21 July 2022 at 22:05 #606840
JohnF
Participant
@johnf59703
Phill, sent you a PM see the flashing INBOX at the top
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 6
- 7
- 15 September 2026 at 13:54
  old mart
- Do you chase a galvanized thread, or leave it alone?
  Started by: elowen01 in: Workshop Tools and Tooling
- 5
- 5
- 15 September 2026 at 13:48
  Nicholas Farr
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 11
- 18
- 15 September 2026 at 13:36
  old mart
- New to castings
  Started by: BOB BLACKSHAW 1 in: Workshop Techniques
- 3
- 3
- 15 September 2026 at 13:20
  JasonB
- Microscope eyepieces
  Started by: gerry madden in: Clocks and Scientific Instruments
- 2
- 3
- 15 September 2026 at 13:18
  Michael Gilligan
- … I had hoped we were growing-out of this nonsense !
  Started by: Michael Gilligan in: The Tea Room
- 12
- 14
- 15 September 2026 at 12:18
  duncan webster 1
- Myford ML7 Motor
  Started by: ian Holdsworth in: Manual machine tools
- 4
- 4
- 15 September 2026 at 09:57
  Michael Gilligan
- Octopus Heat Pump 1 2 3
  Started by: Michael Gilligan in: The Tea Room
- 20
- 63
- 15 September 2026 at 09:46
  Michael Gilligan
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 2
- 3
- 15 September 2026 at 08:40
  bernard towers
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 3
- 3
- 15 September 2026 at 07:36
  Thor 🇳🇴
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 9
- 15 September 2026 at 01:09
  carlw
- 4¾” 13swg copper tubing?
  Started by: martynt50 in: Materials
- 8
- 10
- 14 September 2026 at 22:36
  Mick Bailey
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 12
- 15
- 14 September 2026 at 21:57
  Mike Crossfield
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 9
- 13
- 14 September 2026 at 21:34
  John Purdy
- Revolution – The Future is Out There!
  Started by: JasonB in: Stationary engines
- 3
- 5
- 14 September 2026 at 20:50
  JA
- Tractor meeting in Babenhausen with a small model exhibition
  Started by: Werner Schleidt in: Traction engines
- 2
- 2
- 14 September 2026 at 20:15
  Roger B
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 2
- 2
- 14 September 2026 at 18:54
  JasonB
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 6
- 14 September 2026 at 18:11
  Richard B
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 6
- 13
- 14 September 2026 at 18:07
  Mick Bailey
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 12
- 14 September 2026 at 16:29
  JasonB
- 3 1/2” gauge loco, coupling height?
  Started by: Paul McDonough in: Locomotives
- 5
- 6
- 14 September 2026 at 15:19
  Bazyle
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 6
- 10
- 14 September 2026 at 12:05
  Chris Gunn
- Question about GHT’s retracting topslide drawing 1 2
  Started by: ega in: Workshop Tools and Tooling
- 9
- 28
- 14 September 2026 at 11:35
  ega
- WARNING: Phishing Attempt on MMEE Bookings?
  Started by: Nigel Graham 2 in: Exhibitions, Shows and Club Events
- 3
- 3
- 14 September 2026 at 11:34
  JohnF
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 47
- 182
- 14 September 2026 at 08:27
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies