The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Workshop Tools and Tooling › Jacobs Gear Hobber
That speed gives about 100 feet per minute for steel, which is the accepted cutting speed for HSS cutters on mild steel blanks.
Home › Forums › Workshop Tools and Tooling › Topics
Started by: Peter Goodchild in: General Questions
Peter Goodchild
Started by: Robert Atkinson 2 in: The Tea Room
Robert Atkinson 2
Started by: Trevor Howley in: General Questions
Started by: Michael Gilligan in: Electronics in the Workshop
Started by: Graham Meek in: Manual machine tools
Graham Meek
Started by: Nic Bertelsen in: General Questions
Nic Bertelsen
Started by: th1980 in: Workshop Tools and Tooling
Russell Eberhardt
Started by: ianj in: General Questions
Martin Connelly
Started by: Simon Robinson 4 in: The Tea Room
not done it yet
Started by: david bennett 8 in: Hints And Tips for model engineers
antrepeas
Started by: Bevel in: Materials
Started by: JasonB in: Stationary engines
JasonB
Started by: Mark Slatter in: Manual machine tools
Mark Slatter
Started by: Ian Owen NZ in: Workshop Tools and Tooling
John Hinkley
Started by: Wade Beatty in: Manual machine tools
Wade Beatty
Started by: Andrew Crow in: The Tea Room
Nigel Graham 2
Started by: Deric in: Traction engines
Jeremy Dunn
Started by: Rob Athome in: Beginners questions
th1980
Started by: Fulmen in: The Tea Room
Fulmen
Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
SillyOldDuffer
Started by: williamadam1 in: Introduce Yourself – New members start here!
noel shelley
Started by: Turbine Guy in: Stationary engines
Turbine Guy
Started by: martian in: Electronics in the Workshop
Nicholas Farr
View full reply list.