introduction

introduction

This topic has 6 replies, 6 voices, and was last updated 16 September 2017 at 18:00 by Neil Wyatt.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
15 September 2017 at 17:54 #317192
Bruce Ephgrave
Participant
@bruceephgrave76327
Hello,

My name is Bruce Ephgrave.

My main interest is in 5 inch gauge steam locomotives. ( B R Standards) Hope to start one soon.
Advert

15 September 2017 at 17:54 #40160
Bruce Ephgrave
Participant
@bruceephgrave76327
15 September 2017 at 20:42 #317210
Micky T
Participant
@mickyt
Welcome to the forum. There are a lot of knowledgable people on here who will be more than willing to offer you their wisdom and knowledge

Mick
15 September 2017 at 21:15 #317212
Harry Wilkes
Participant
@harrywilkes58467
Welcome to the forum

H
16 September 2017 at 16:00 #317264
mechman48
Participant
@mechman48
Welcome Bruce, there's a plethora of knowledge in here so don't be shy.

George.
16 September 2017 at 17:16 #317266
Chris Evans 6
Participant
@chrisevans6
Welcome Bruce, as said above lots of help here. What is you location ? Do you have any machinery yet ?
16 September 2017 at 18:00 #317270
Neil Wyatt
Moderator
@neilwyatt
Hello Bruce,

Welcome to the forum,

Neil
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Octopus Heat Pump 1 2
  Started by: Michael Gilligan in: The Tea Room
- 18
- 47
- 14 September 2026 at 19:01
  Michael Gilligan
- Tractor meeting in Babenhausen with a small model exhibition
  Started by: Werner Schleidt in: Traction engines
- 1
- 1
- 14 September 2026 at 18:55
  Werner Schleidt
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 2
- 2
- 14 September 2026 at 18:54
  JasonB
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 1
- 1
- 14 September 2026 at 18:44
  tatler
- … I had hoped we were growing-out of this nonsense !
  Started by: Michael Gilligan in: The Tea Room
- 7
- 9
- 14 September 2026 at 18:44
  JohnF
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 1
- 1
- 14 September 2026 at 18:16
  Mike Crossfield
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 6
- 14 September 2026 at 18:11
  Richard B
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 6
- 13
- 14 September 2026 at 18:07
  Mick Bailey
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 9
- 11
- 14 September 2026 at 17:17
  John Haine
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 12
- 14
- 14 September 2026 at 16:47
  Graeme Seed
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 12
- 14 September 2026 at 16:29
  JasonB
- 3 1/2” gauge loco, coupling height?
  Started by: Paul McDonough in: Locomotives
- 5
- 6
- 14 September 2026 at 15:19
  Bazyle
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 6
- 10
- 14 September 2026 at 12:05
  Chris Gunn
- Question about GHT’s retracting topslide drawing 1 2
  Started by: ega in: Workshop Tools and Tooling
- 9
- 28
- 14 September 2026 at 11:35
  ega
- WARNING: Phishing Attempt on MMEE Bookings?
  Started by: Nigel Graham 2 in: Exhibitions, Shows and Club Events
- 3
- 3
- 14 September 2026 at 11:34
  JohnF
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 7
- 10
- 14 September 2026 at 08:39
  JasonB
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 47
- 182
- 14 September 2026 at 08:27
  JasonB
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 7
- 14 September 2026 at 03:24
  carlw
- LG Smart TVs
  Started by: Michael Gilligan in: The Tea Room
- 11
- 14
- 13 September 2026 at 18:12
  Michael Gilligan
- Seig sx2p mill
  Started by: BOB BLACKSHAW 1 in: Manual machine tools
- 3
- 8
- 13 September 2026 at 13:12
  Ches Green UK
- Wilson Slant Bed Lathe
  Started by: JC54 in: Manual machine tools
- 7
- 16
- 13 September 2026 at 11:44
  odubhain82
- Steam Traction World in administration
  Started by: Baldric in: The Tea Room
- 13
- 21
- 12 September 2026 at 21:28
  Nigel Graham 2
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 30
- 12 September 2026 at 20:44
  duncan webster 1
- Oilstones / Waterstones
  Started by: Grindstone Cowboy in: General Questions
- 7
- 14
- 12 September 2026 at 16:57
  Grindstone Cowboy
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 22
- 51
- 12 September 2026 at 16:49
  Mick B1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies