International tooling

[Andrew TinsleyParticipant @andrewtinsley63637]

Can anyone recommend a site or book, that defines the measurements of International taper tooling. There are several different sizes taking up room in my workshop.So I have a selection of such tooling and no use for it.

I would like to sell it on, but I am stumped for an accurate description.

Thanks in advance,

Andrew.

[Andrew TinsleyParticipant @andrewtinsley63637]

[Brian GParticipant @briang]

Would this help?

**LINK**

Brian G

[Andrew TinsleyParticipant @andrewtinsley63637]

Hello Brian,

That is just the ticket! Problem solved.

Thanks,

Andrew.

[Howard LewisParticipant @howardlewis46836]

If that had not been available, I could provide a copy of a handout from my time as an Apprentice which gave some sizes

A modern Apprentice has just made an adaptor with Int 40 taper. But he said that bit was 8 degrees taper. at 3.5" per foot, it actually works out at 8.13 degrees.

Google can provide details, also.

Howard

[Author]

Posts