Harrison 155 threading gearbox issue.

Harrison 155 threading gearbox issue.

Home › Forums › General Questions › Harrison 155 threading gearbox issue.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #562844
    Scott Webster 1
    Participant
      @scottwebster1

      Hi, I've just bought a Harrison 155 lathe, is fine apart from the treading gears/swicthes.

      The don't seem to mesh correctly and the switches seem very light, and at times very tight.

      I was wondering if anyone knows of a place I could get a manual, or drawings of the lathe. Or any information on the lathe at all.

      Unfortunately I didn't get anything with it, the previous owner didn't have anything.

      Any help would be hugely appreciated.

      Many thanks

      Scott.

      #28346
      Scott Webster 1
      Participant
        @scottwebster1
        #562857
        Thor 🇳🇴
        Participant
          @thor

          Hi Scott,

          Congratulations with your "new" lathe. I don't know if you have already found them, but there are a few Youtube videos here and here, and you may be able to buy a manual from lathes.co.uk.

          Seems your model has been discussed here.

          Thor

          Edited By Thor on 15/09/2021 07:44:15

        Viewing 3 posts - 1 through 3 (of 3 total)
        • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

        Latest Replies

        Home › Forums › General Questions › Topics

        Viewing 25 topics - 1 through 25 (of 25 total)
        Viewing 25 topics - 1 through 25 (of 25 total)

        View full reply list.