Engineering in miniature May 1980-October 1981.

[Knock-WoodParticipant @knock-wood]

I am looking for a series of eighteen articles regarding the construction of a Monarch engine by A. J. Reeves published in Engineering in miniature over the period May 1980-October 1981. I realise I could purchased the relevant back issues from Tee Publishing but this would prove rather costly.

[Knock-WoodParticipant @knock-wood]

[JasonBModerator @jasonb]

You should be able to pick a those two years for a couple of pounds each, that's what they were selling for a few weeks ago at teh Guildford show, ME was £1 per volume.

[Knock-WoodParticipant @knock-wood]

Thanks Jason I'll keep looking on ebay if I can get the 18 issues I require at a pound an issue it would be worth it.. Best wishes Colin.

Edited By JasonB on 20/07/2019 13:09:03

[Brian HParticipant @brianh50089]

Hello Colin, have a look in your inbox (in the green stripe at the top, 2nd from left)

Brian

[Brian HParticipant @brianh50089]

Hello Colin, please read mails in your inbox.

Brian

[JennyParticipant @jenny]

Hi Colin

if you are still looking for those issues please let me know. I just purchased the first 25 years of Engineering in miniature, hard bound.

I can scan the build thread you are looking for when I pick them up on the 4th.

Jenny

[Richard Powell 1Participant @richardpowell1]

I wonder if you ever had a scan for the monarch engine construction, as I am looking for similar, please.

Richard

[Author]

Posts