afternoon

afternoon

This topic has 6 replies, 6 voices, and was last updated 9 August 2024 at 10:31 by noel shelley.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
7 August 2024 at 16:07 #745726
ultra61
Participant
@ultra61
afternoon folks,im just trying to get back into smaller engineering after being a fabricator for nearly half century,am restoring some machines for now but am stuck trying to find a small drill chuck with a JT1 taper.

cheers JB
Advert

7 August 2024 at 16:10 #745733
JasonB
Moderator
@jasonb
Have a look at both the keyed and keyless chucks here, they get favorable comments from forum members
7 August 2024 at 16:17 #745737
ultra61
Participant
@ultra61
ok thanks.

JB
7 August 2024 at 17:31 #745748
Harry Wilkes
Participant
@harrywilkes58467
Welcome

H
9 August 2024 at 09:11 #746071
Howard Lewis
Participant
@howardlewis46836
Welcome!

You might find what you want from Arc Euro Trade, RDG, Warco, or Axminster

Have a look on their websites

Howard
9 August 2024 at 10:23 #746085
bernard towers
Participant
@bernardtowers37738
Try Ian. at Rotagrip
9 August 2024 at 10:31 #746089
noel shelley
Participant
@noelshelley55608
Welcome JB, others have offered scources of chucks etc . Noel.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 13
- 22
- 11 November 2026 at 01:37
  Graeme Seed
- Impact Bits
  Started by: Vic in: Workshop Tools and Tooling
- 5
- 6
- 10 November 2026 at 23:20
  Vic
- Hello everyone
  Started by: point.two.five in: Introduce Yourself – New members start here!
- 1
- 1
- 10 November 2026 at 22:50
  point.two.five
- What Did You Do Today 2026 1 2 … 10 11
  Started by: JasonB in: The Tea Room
- 56
- 252
- 10 November 2026 at 22:27
  Michael Gilligan
- Kirimoto CAM
  Started by: Geoff Dunsby in: CAD – Technical drawing & design
- 3
- 9
- 10 November 2026 at 21:26
  Geoff Dunsby
- Annoying advert 1 2
  Started by: Dalboy in: The Tea Room
- 16
- 26
- 10 November 2026 at 20:32
  JasonB
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 6
- 18
- 10 November 2026 at 17:23
  BOB BLACKSHAW 1
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 13
- 17
- 10 November 2026 at 16:05
  old mart
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 84
- 10 November 2026 at 12:07
  John Hinkley
- Straining the old grey matter!
  Started by: Geoff Dunsby in: Introduce Yourself – New members start here!
- 6
- 10
- 10 November 2026 at 10:42
  Geoff Dunsby
- Hello! …and help
  Started by: sbruce886 in: Introduce Yourself – New members start here!
- 5
- 8
- 10 November 2026 at 09:48
  noel shelley
- New Mystery Lathe 1 2
  Started by: mart7mcfl7 in: Manual machine tools
- 9
- 27
- 10 November 2026 at 07:35
  JasonB
- Pendulum Rod Weight Tray
  Started by: John Purdy in: Clocks and Scientific Instruments
- 4
- 15
- 10 November 2026 at 00:29
  duncan webster 1
- 3d Printed Carriage Stop for Warco WM180
  Started by: James A in: Workshop Tools and Tooling
- 13
- 22
- 9 November 2026 at 23:29
  Bazyle
- Trying a new controller
  Started by: John Haine in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 9
- 9 November 2026 at 23:02
  Geoff Dunsby
- Richard Simmonds’ “How To Make A Weight Driven Clock” 1 2
  Started by: iacooper in: Clocks and Scientific Instruments
- 13
- 29
- 9 November 2026 at 19:11
  John Purdy
- hello!
  Started by: poli2 in: Introduce Yourself – New members start here!
- 3
- 3
- 9 November 2026 at 18:01
  noel shelley
- The NCSC warns that …
  Started by: Michael Gilligan in: The Tea Room
- 13
- 16
- 9 November 2026 at 17:50
  noel shelley
- Physcad 1 2
  Started by: Ron Colvin in: CAD – Technical drawing & design
- 11
- 28
- 9 November 2026 at 17:18
  Fulmen
- Tiny Heliocentric Orrery
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 2
- 2
- 9 November 2026 at 09:42
  Ches Green UK
- Stepper Motor for Leadscrew 1 2
  Started by: James A in: Workshop Tools and Tooling
- 13
- 27
- 9 November 2026 at 09:04
  Nick Wheeler
- 2inch Fowler plans
  Started by: bob53page in: Traction engines
- 7
- 19
- 9 November 2026 at 05:35
  Walt Nehse
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 7
- 8
- 8 November 2026 at 22:51
  Grindstone Cowboy
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 8
- 8 November 2026 at 17:42
  Martin Johnson 1
- Lubricating a high helix worm in a Mercer indicator
  Started by: Mark Davison 1 in: Clocks and Scientific Instruments
- 7
- 8
- 8 November 2026 at 17:15
  Bo’sun

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

November 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies