Brass bar , 55 mm – ?supplier

Brass bar , 55 mm – ?supplier

Home › Forums › Beginners questions › Brass bar , 55 mm – ?supplier

Viewing 18 posts - 1 through 18 (of 18 total)
  • Author
    Posts
  • #354649
    capnahab
    Participant
      @capnahab

      I need to make some bearing retainer rings for a set of BSA bike wheels, ( possibly originally B44 for a metisse build). They are just over 2 inches diameter so not critically 55 ml, – 2 ⅛ inches would do.

      I need about 6 inches.

      Can anyone recommend a supplier?. Or has anyone got some they want to sell ?

      Cheers

      Nick

      Edited By capnahab on 19/05/2018 11:50:05

      #9192
      capnahab
      Participant
        @capnahab
        #354652
        Brian H
        Participant
          @brianh50089

          It would be useful to know your approximate location.

          Brian

          #354653
          John Rudd
          Participant
            @johnrudd16576

            Macc models have 2-1/2" stock….

            You could try M-Machine in Darlington…

            Edited By John Rudd on 19/05/2018 12:05:46

            #354654
            capnahab
            Participant
              @capnahab

              I am near Ilkley Brian.

              #354658
              pgk pgk
              Participant
                @pgkpgk17461

                M machine are usually quite decent .. does it have to be copper? Since these are rings could cast hollow PB be used? It might reduce cost.depending on id.

                pgk

                #354659
                mgnbuk
                Participant
                  @mgnbuk
                  eBay item number: 273050215411
                  A 200mm length of 55 diameter is £60 delivered – out of touch with metal prices, so don't know if that is par for the course or OTT
                  HTH
                  Nigel B
                  #354704
                  Chris Evans 6
                  Participant
                    @chrisevans6

                    At those prices I would be making them out of a decent grade of aluminium. Are they like the seal retainers found in models like Ariel front and rear hubs?

                    #354714
                    Bill Pudney
                    Participant
                      @billpudney37759

                      Most bearing retainers I've seen have been circlips…………

                      cheers

                      Bill

                      #354716
                      Philip D
                      Participant
                        @philipd

                        L

                        Edited By Philip D on 19/05/2018 23:24:03

                        #354717
                        capnahab
                        Participant
                          @capnahab

                          Chris – thanks , good point , no idea what arials look like but the wrecked ones in are brass so I will be sticking to brass.

                          Bill, – not much good at keeping the mud out tho.

                           

                          Edited By capnahab on 19/05/2018 23:54:53

                          #354735
                          capnahab
                          Participant
                            @capnahab

                            Thanks chaps , some good suggestions – seems the £60 isn't too bad when I will get about 6 out of it. A supplier of vintage parts is charging £20 for a single in aluminium.

                            #354737
                            Phil Boyland
                            Participant
                              @philboyland37326

                              Live steam models in Little Eaton do 2.25” at £6.36 per inch.

                              #354762
                              Mark Rand
                              Participant
                                @markrand96270

                                If it's of any help, I've got some 3" CZ121 bar you could use How about £25 for 6" and £6.50 for Myhermes shipping?

                                Only because I had a B25 as a student laugh.

                                #354774
                                capnahab
                                Participant
                                  @capnahab

                                  It’s a deal sir. Many thanks. I will pm you.

                                  The photo shows the old one. eddc84e5-e724-4153-879d-b651d6e99275.jpeg

                                  #354855
                                  capnahab
                                  Participant
                                    @capnahab

                                    Hi Mark, if I have done it correctly you should have a message in you inbox

                                    Cheers

                                    #354868
                                    Mark Rand
                                    Participant
                                      @markrand96270

                                      Replied the same way

                                      #354898
                                      john carruthers
                                      Participant
                                        @johncarruthers46255

                                        Trepan them from sheet?

                                      Viewing 18 posts - 1 through 18 (of 18 total)
                                      • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                                      Latest Replies

                                      Home › Forums › Beginners questions › Topics

                                      Viewing 25 topics - 1 through 25 (of 25 total)
                                      Viewing 25 topics - 1 through 25 (of 25 total)

                                      View full reply list.