diy dovetail cutters

diy dovetail cutters

Home › Forums › Beginners questions › diy dovetail cutters

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #318505
    BW
    Participant
      @bw

      Hello who has made their own diy dovetails and what carbide bits did you use please ?

      See my album for my first try. Bit type is unknown. A friend gave me some bits and I had a go.

      Here are some commercially available ones

      http://www.shars.com/1-2-indexable-60-dovetail-cutter

      I cannot find those inserts on ebay, would the code be unique to Shars ?

      TDEX21.52E

      Bill

      #8880
      BW
      Participant
        @bw

        best carbide inserts for diy dovetail cutter

        #318510
        Raymond Anderson
        Participant
          @raymondanderson34407

          There are a few pics in one of my albums of a set I made from IIRC en24 and tcgt inserts [ various sizes ] be precise when setting up to machine the pocket / angle, also use the correct screws for the inserts [ vey important ] I used tcgt inserts because of the 7deg clearance angle to prevent rubbing and gives a nice soft cutting action The test block in some of the pics is either en16 or 24 can't remember. There is a thread on them somewhere on this site

          Good luck.

          #318535
          Neil Wyatt
          Moderator
            @neilwyatt

            Here you go Bill:

            #318554
            Thor 🇳🇴
            Participant
              @thor

              Hi Bill,

              I have made a carbide tipped dovetail cutter more or less like described here, using a TCMT insert. There is another description of a dovetail cutter with carbide inserts on MikesWorkshop. A multipoint cutter would cut better than a singlepoint cutter, but I often use the carbide tipped cutter to mill away most of the material and use a HSS cutter for the finishing cut.

              Thor

              #318566
              Martin Connelly
              Participant
                @martinconnelly55370

                There is a recent thread on this.

                **LINK**

                Martin C

                #318749
                BW
                Participant
                  @bw

                  Thanks for the responses. Am off to learn about inserts, particularly TC inserts.

                  WHilst investigating inserts I couldnt help noticing on the market that must not be named the huge disparity in prices ie all the way from $7ish to $100+ for 10 inserts.

                  AM assuming anything less than $50 for 10 is rubbish quality ? I have no idea, have been putting off learning about inserts but now looks like the right time.

                  Bill

                  #318754
                  Thor 🇳🇴
                  Participant
                    @thor

                    Hi Bill,

                    If buying brands like Sandvik, Sumitomo etc. you know what you get. I have tried cheap inserts and some seem to work as well as the expensive ones, at least for my modest use. I tried a box of 10 first and have bought the same again from the same supplier.

                    Thor

                    #318896
                    BW
                    Participant
                      @bw

                      This is interesting

                    Viewing 9 posts - 1 through 9 (of 9 total)
                    • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                    Latest Replies

                    Home › Forums › Beginners questions › Topics

                    Viewing 25 topics - 1 through 25 (of 25 total)
                    Viewing 25 topics - 1 through 25 (of 25 total)

                    View full reply list.