Poty overcrank engine

This topic has 3 replies, 3 voices, and was last updated 28 October 2011 at 20:10 by Stewart Hart.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
28 October 2011 at 13:24 #76987
Eric Cox
Participant
@ericcox50497
ME4415 part 20 oiler

The oiler is made up of three components. The cap, reservoir and what is the third and what’s it’s purpose.
Advert

28 October 2011 at 13:24 #5725
Eric Cox
Participant
@ericcox50497
28 October 2011 at 14:41 #76990
JasonB
Moderator
@jasonb
I’m sure Stew will confirm but I think its just a spacer.

When Stew originally made the engine it was as a vertical wall engine (my prefered configuration) and it had oilers to suit being rotated 90degrees, I guess the oilers for the horz setup are a compromise and the spacers keep the oilcup away from the moving parts.

J

PS Stew, any chance of posting a pic of the wall version for people that have not seen it.
28 October 2011 at 20:10 #77004
Stewart Hart
Participant
@stewarthart90345
Hi Eric

Jason is correct what he says the other bit is just a spacer to lift it away from the moving parts.

I did make it so it could be displayed vertically all that required is 90 deg oilers as Jason said and I did actually make the oilers. the only problem with displaying it vertical is the stability of the display, I’ve a couple of young grand kids and I didn’t wan’t to risk them pulling it over on themselfes.

[IMG]http://i431.photobucket.com/albums/qq32/sbwhart/Potty%20Over%20Crank%20Wall%20Engine/131_0426.jpg[/IMG]

[IMG]http://i431.photobucket.com/albums/qq32/sbwhart/Potty%20Over%20Crank%20Wall%20Engine/131_0430.jpg[/IMG]

I’ve posted photobucket image codes, I don’t have a complete picture of it as a vertical.

If any body wants a copy of the 90 deg oiler just send me a PM.

Thanks for your interest

Stew
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Hi there fellow engineers
  Started by: ray1580 in: Introduce Yourself – New members start here!
- 5
- 7
- 6 July 2026 at 11:16
  alecs
- Jaxon Steam Car ride to the next 5 inch rail club
  Started by: Werner Schleidt in: Traction engines
- 3
- 3
- 6 July 2026 at 11:16
  duncan webster 1
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 2
- 2
- 6 July 2026 at 11:15
  Baz
- Flat Surface 1 2 3
  Started by: COLIN MARTIN 2 in: Materials
- 32
- 61
- 6 July 2026 at 10:36
  alecs
- Unwanted Car Software Update 1 2
  Started by: Chris Crew in: The Tea Room
- 19
- 28
- 6 July 2026 at 10:29
  John Haine
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 28
- 67
- 6 July 2026 at 10:21
  bernard towers
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 60
- 6 July 2026 at 08:29
  alecs
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 12
- 13
- 6 July 2026 at 01:16
  howardb
- Accolade
  Started by: Bill Dawes in: General Questions
- 8
- 8
- 6 July 2026 at 00:18
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 119
- 6 July 2026 at 00:13
  Nigel Graham 2
- Laser centre finder 1 2
  Started by: Buffer in: General Questions
- 16
- 33
- 5 July 2026 at 21:54
  Vic
- Brass covered steel
  Started by: Dougie Swan in: General Questions
- 9
- 10
- 5 July 2026 at 20:43
  Dougie Swan
- Testing Single Point Thread Fitment 1 2
  Started by: berwick in: Beginners questions
- 17
- 30
- 5 July 2026 at 16:44
  Michael Gilligan
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 41
- 5 July 2026 at 15:45
  Nick Welburn
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 51
- 5 July 2026 at 13:22
  southernchap
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 8
- 18
- 5 July 2026 at 10:29
  John Haine
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 5
- 9
- 5 July 2026 at 10:06
  michael m
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 5
- 12
- 4 July 2026 at 20:19
  Bill Phinn
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 324
- 4 July 2026 at 16:46
  Phil Whitley
- NPT thread
  Started by: Bill Dawes in: General Questions
- 8
- 11
- 4 July 2026 at 15:46
  Dave Halford
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 26
- 4 July 2026 at 15:12
  SteveP
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 6
- 9
- 3 July 2026 at 22:23
  Mark Rand
- Leadscrew Handwheel for Warco WM180
  Started by: James A in: Manual machine tools
- 9
- 17
- 3 July 2026 at 20:45
  Andy Stopford
- Clarkson radius grinding attachment
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 5
- 10
- 3 July 2026 at 19:28
  Clive Foster
- Gas Tap Valves. Vintage 1 2 3 4
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 22
- 88
- 3 July 2026 at 18:36
  duncan webster 1

Poty overcrank engine

Poty overcrank engine

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies