Lathe tailstock

Lathe tailstock

This topic has 5 replies, 3 voices, and was last updated 5 September 2017 at 10:48 by Kenneth Widdall.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
31 August 2017 at 16:55 #314711
Kenneth Widdall
Participant
@kennethwiddall83506
Hi l have a new barrel and nut for a Harrison tail stock which l got to replace the one in my 5/1/2 Harrison

but never did so the barrel fits my old tail stock ok but the thread in the nut is different. dose any one know if the thread

in the nut has been change.as l need to know it so l can sell it
Advert

31 August 2017 at 16:55 #38434
Kenneth Widdall
Participant
@kennethwiddall83506
1 September 2017 at 20:56 #314857
David George 1
Participant
@davidgeorge1
Hi I have fitted new nuts in the past and there are at least two as some were metric and some were imperial.

David
5 September 2017 at 02:42 #315259
Kenneth Widdall
Participant
@kennethwiddall83506
Thank you for the reply's The nut in the barrel that l have must be metric as the imperil screw l tried would not fit. Ken
5 September 2017 at 04:25 #315262
not done it yet
Participant
@notdoneityet
must be metric

Sorry, but that assumption is flawed – if the previous reply is read correctly. There may be more than a single imperial thread used. Likely, but not certainly.
5 September 2017 at 10:48 #315314
Kenneth Widdall
Participant
@kennethwiddall83506
Thank you for the reply's l will sell the barrel without a nut .
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Use of Hydrostatic lubrication in steam locomotives
  Started by: Greensands in: Locomotives
- 4
- 4
- 19 August 2025 at 16:51
  Richard Simpson
- End Mill Sharpening Jig
  Started by: Vic in: Workshop Tools and Tooling
- 3
- 4
- 19 August 2025 at 16:49
  bricky
- Greatest Model Engineer
  Started by: Juddy in: The Tea Room
- 13
- 16
- 19 August 2025 at 16:28
  bricky
- Solar panel
  Started by: duncan webster 1 in: Electronics in the Workshop
- 2
- 2
- 19 August 2025 at 15:11
  not done it yet
- St Albans Big Show 27 & 28 Sept 25
  Started by: Bazyle in: Exhibitions, Shows and Club Events
- 2
- 2
- 19 August 2025 at 14:20
  Bo’sun
- Making Unimat DB/SL Steadies 1 2
  Started by: Andy Carlson in: Workshop Techniques
- 12
- 37
- 19 August 2025 at 13:44
  duncan webster 1
- Backplate
  Started by: Steve355 in: General Questions
- 10
- 21
- 19 August 2025 at 13:12
  JasonB
- Steam driven air pump for brakes
  Started by: Werner Schleidt in: Locomotives
- 10
- 18
- 19 August 2025 at 13:07
  Martin Johnson 1
- New Compressor
  Started by: Andy Brocklehurst in: General Questions
- 15
- 22
- 19 August 2025 at 10:09
  Henry Buckeldee
- Opposed Piston Engines 1 2
  Started by: Richard Simpson in: The Tea Room
- 12
- 28
- 19 August 2025 at 09:09
  Howard Lewis
- The stand alone weight for tower clock
  Started by: dk0 in: Clocks and Scientific Instruments
- 6
- 12
- 19 August 2025 at 06:34
  John Haine
- Cheap DRO
  Started by: Steve355 in: General Questions
- 11
- 18
- 18 August 2025 at 20:20
  Steve355
- Harold Hall – 1933 -2024
  Started by: Neil Wyatt in: Website Announcements
- 13
- 15
- 18 August 2025 at 18:24
  Vic
- My week this week! My workshop videos 1 2 … 11 12
  Started by: Phil Whitley in: The Tea Room
- 16
- 295
- 18 August 2025 at 17:20
  vic newey
- Who’s to be trusted ? 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 18
- 29
- 18 August 2025 at 16:01
  HOWARDT
- NU tool milling machine
  Started by: joseph tatler in: Manual machine tools
- 7
- 11
- 18 August 2025 at 11:11
  Martin Connelly
- Model Engineer Magazine Collection
  Started by: mfengine1 in: Books
- 10
- 19
- 18 August 2025 at 09:33
  bcaddle62
- Building Bernard Tekippe’s Precision Regulator 1 2 … 5 6
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 14
- 147
- 18 August 2025 at 03:37
  Michael Gilligan
- Herbert B Drill Pulley and Lubrication
  Started by: Steve Hunt in: Help and Assistance! (Offered or Wanted)
- 3
- 8
- 18 August 2025 at 00:24
  Steve Hunt
- 3 phase supply (again) 1 2 3
  Started by: colin hamilton in: General Questions
- 21
- 55
- 17 August 2025 at 19:33
  mark costello 1
- Vickers Inverted Engine 1 2 3
  Started by: JasonB in: Stationary engines
- 11
- 52
- 17 August 2025 at 19:29
  JasonB
- Henry Buckeldee
  Started by: Michael Gilligan in: The Tea Room
- 1
- 2
- 17 August 2025 at 16:03
  Michael Gilligan
- Old Magazines – Countrymans Steam Suffolk Dredging Tractor
  Started by: Tris Summers in: The Tea Room
- 1
- 1
- 17 August 2025 at 15:49
  Tris Summers
- Open Day at Warrington
  Started by: duncan webster 1 in: The Tea Room
- 2
- 2
- 17 August 2025 at 14:52
  Martin Kyte
- Raab Style Heibluftmotor
  Started by: JasonB in: Miscellaneous models
- 3
- 5
- 17 August 2025 at 13:05
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies