Pro Machines UK

This topic has 10 replies, 8 voices, and was last updated 25 January 2022 at 23:05 by Michael Gilligan.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
25 January 2022 at 11:07 #582286
Bountyboy
Participant
@bountyboy
Hello,

I ordered a couple of replacement components for my EMCO lathe on the 10/01/2022 from Pro Machine Tools Ltd.

Apart from the initial confirmation email I’ve had no further contact from them. I tried phoning but all I get is an answer phone message saying that I can’t leave a message.

I’ve also emailed via their website but I’m still waiting to hear

Has anyone else had any dealings or issues with Pro Machine Tools Ltd?
Advert

25 January 2022 at 11:07 #33955
Bountyboy
Participant
@bountyboy
25 January 2022 at 11:11 #582287
Former Member
Participant
@formermember12892
[This posting has been removed]
25 January 2022 at 11:24 #582291
Bountyboy
Participant
@bountyboy
Sorry, the title should have been Pro Machine Tools Uk.

BR, hope you got your money back?
25 January 2022 at 11:25 #582292
gerry madden
Participant
@gerrymadden53711
I sent emails and messages on the website just before Xmas and have had no responses.

What I was enquiring about was reversing gears to enable me to cut left-hand threads on my trusty D3000. Knowing that such parts would likely be expensive and not wanting to wait, I had a go at twisting the toothed drive belt to the leadscrew instead. I was more than pleased when this worked perfectly, several times ! You can see it in the pic below.
25 January 2022 at 11:37 #582298
JasonB
Moderator
@jasonb
Not used them for some time but the long out of production parts for my Emcomat arrived OK.
25 January 2022 at 12:32 #582318
Bo’sun
Participant
@bosun58570
Gerry, get some spare belts, they won't last long like that.
25 January 2022 at 13:14 #582325
Frank Gorse
Participant
@frankgorse
I had to order some electrical bits from them for my Wabeco milling machine. Didn’t find them the best firm to deal with,the parts took weeks to come from Germany (perhaps that’s just the present situation) but at least I got them. They don’t even keep a set of brushes-universal for the Wabeco range-in stock here.
25 January 2022 at 19:41 #582399
gerry madden
Participant
@gerrymadden53711
Hi Bo'sun, I know it 'looks' ugly but I don't think its that too unhealthy for the belt. Where the teeth cross they don't seem to interfere with each other. Where the belt reaches the pulley the only effect is that the teeth land on one end first. It all looks quite comfortable really. Sure there is a little bit more stress and flexing in the belt but I'm sure it can handle that.

I think I have seen flat belts crossed like that before and a toothed belt isn't too far from a flat belt,… and it probably runs with less tension too. Certainly no signs of distress on my the belt after cutting five or six 40mm dia threads.

I did find reverse gears on baye for about £300 so at that price its twisted belts every time for me now .

Gerry
25 January 2022 at 19:56 #582402
not done it yet
Participant
@notdoneityet
This same problem came up on a thread last year? I called at his office/shop but he did not contact me – and the guy opposite told me that he had passed my details to him. It’s on a thread, somewhere on here, in the last year (I think).
25 January 2022 at 23:05 #582421
Michael Gilligan
Participant
@michaelgilligan61133
The ebay shop is still live : **LINK**

https://www.ebay.co.uk/str/promachinetoolsltd

… although not much recent feedback

MichaelG.
Author

Posts