Carl Rehfuss INVERTER Instructions

This topic has 6 replies, 3 voices, and was last updated 3 March 2017 at 21:34 by peak4.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
3 March 2017 at 19:59 #286962
peak4
Participant
@peak4
Hello, just picked up an inverter off ebay and wonder if anyone out there has a set of instructions available as a pdf please?

The item in question is;

Carl Rehfuss Single – 3 Phase Inverter FR230-E75 0.75KW

No appropriate downloads available on their web site, though I have dropped them an email asking for info; unfortunately from past experience, I'm not holding my breath, though this company may well be more helpful than some others.

Many Thanks

Bill
Advert

3 March 2017 at 19:59 #32913
peak4
Participant
@peak4
3 March 2017 at 20:47 #286981
Steven Vine
Participant
@stevenvine79904
Hi Bill

A shot in the dark this. I found a picture of the FR here **LINK**

The one on the left looks a lot like a TVERTER-E2-202-H1F that I have. I have a manual for this.

Maybe they are putting their badge on a generic inverter?

Steve

Edited By Steven Vine on 03/03/2017 20:53:43
3 March 2017 at 21:01 #286985
John Rudd
Participant
@johnrudd16576
The inverters are made by Teco.

The manuals are available from the Teco Westinghouse website.

Edited By John Rudd on 03/03/2017 21:04:40
3 March 2017 at 21:07 #286988
peak4
Participant
@peak4
Thankyou Gentlemen,

I'll head over to Teco for a shufty.

If that fails, I'll likely be in touch Steven

Cheers folks
3 March 2017 at 21:21 #286993
John Rudd
Participant
@johnrudd16576
I can email you a copy of the manual…..

Send your email address via private message if you want a copy.

Or go here:

http://www.drivesdirect.co.uk/Downloads/E2%20MANUAL.pdf

Edited By John Rudd on 03/03/2017 21:24:25
3 March 2017 at 21:34 #286996
peak4
Participant
@peak4
Posted by John Rudd on 03/03/2017 21:21:23:

I can email you a copy of the manual…..

Send your email address via private message if you want a copy.

Or go here:

http://www.drivesdirect.co.uk/Downloads/E2%20MANUAL.pdf

Edited By John Rudd on 03/03/2017 21:24:25

Thanks John, I was just reading/downloading it as I got the notification for your post.

Just need to get my head round the programming of the various inverters.

They're all over in Buxton at the moment; I already have one powering my Centec 2B, but never did get the external variable speed pot to work; now it's in the new workshop, I have more space and light, and a manual.

Next one is a different make, and will go with a new motor I've just bought, to go on the Dore – Westbury, and finally this Teco/Rehfuss one to go on my original Myford when I move it over to Buxton from Sheffield.

The original plan was to sell the Myford from Sheffield and keep a Warco720 Myford S7 in Buxton, but it looks like I need a lathe over there to re-engineer some of it's design "features"

Thanks for the help

Bill

Edited By peak4 on 03/03/2017 21:53:50
Author

Posts