Looking for a compact and safe mains lead connector

Looking for a compact and safe mains lead connector

Home › Forums › General Questions › Looking for a compact and safe mains lead connector

Viewing 25 posts - 1 through 25 (of 39 total)
  • Author
    Posts
  • #28327
    Michael Gilligan
    Participant
      @michaelgilligan61133
      #560521
      Michael Gilligan
      Participant
        @michaelgilligan61133

        I have a new mains-powered ‘Studio’ flash head which, rather inconveniently, has a fixed mains lead [2-core U.K.]

        I propose to cut it short, and add an in-line connector; so that the long lead can be stored separately.

        The obvious question is : What connector would our electrical experts recommend ?

        MichaelG.

        #560526
        SillyOldDuffer
        Moderator
          @sillyoldduffer

          I like the IEC 'Kettle' connectors as used on computers. They normally plug into a bulkhead socket but flying males are easily had, this example is wired up as an adaptor:

          I don't care for anything more delicate on 240v mains wiring but could be prejudice!

          Dave

          #560529
          Andrew Entwistle
          Participant
            @andrewentwistle

            Hi Michael, my preference is to use a rewireable IEC C14 plug and C13 socket (possibly moulded-on if a standard 13A plug to C13 socket lead is available). It is a shame that there is no similar connector pair for figure of 8 format (IEC C7/C8) that would be more compact and with just the 2-poles that you need.

            Andrew.

            #560535
            Michael Gilligan
            Participant
              @michaelgilligan61133

              Thanks to you both … but I was really looking for something more compact

              Andrew is thinking along the right lines, but I have yet to find anything suitable

              The head is labelled E14/75W AC220V 50Hz, and the mains plug has a 5A fuse

              … a ‘kettle connector’ would surely be overkill

              MichaelG.

              #560537
              Frances IoM
              Participant
                @francesiom58905

                the 2-pin connectors may be found in moulded connection – I have several salvaged from old Sky boxes gleaned from my local amenity site. Interestingly they all use a distinctive round format 13amp plug but with a 5amp fuse..
                Not sure re bulkhead fittings as most I have were designed for PCB mounting with the PCB also mounting switches etc

                Edited By Frances IoM on 31/08/2021 15:52:13

                #560540
                Grindstone Cowboy
                Participant
                  @grindstonecowboy

                  I'd go for something like this – other colours (and suppliers) are available.

                  Links to https://cpc.farnell.com/pro-elec/0128-bk/connector-rubber-10a-2-pin-black/dp/PL09471?st=plug%20in%20mains%20adapter

                  Rob

                  Oh, and hopefully not teaching anyone to suck eggs, but remember to put the socket on the "live" side of the connection.

                  Edited By Grindstone Cowboy on 31/08/2021 16:03:26

                  #560544
                  Robert Atkinson 2
                  Participant
                    @robertatkinson2

                    There is not much vailable that is smaller than IEC C14/15 and suitable for inline use.The two pin (IEC C4/5) connectors are not made as inline male.

                    The only common one is the rubber inline 2 pin connector used for garden tools.

                    https://uk.farnell.com/pro-elec/0128-or/connector-rubber-10a-2-pin-orange/dp/3472736

                    or black

                    https://uk.farnell.com/pro-elec/0128-bk/connector-rubber-10a-2-pin-black/dp/3472734

                    Theleed used to interconnect these lights would do, but are not re-wireable so you would have to modify them flash to attach one.

                    https://www.tlc-direct.co.uk/Main_Index/Lighting_Menu_Index/Lighting_Fluorescent_Index/Linkable_Flourescent_Fitting/index.html

                    Robert G8RPI

                    Edit,

                    Rob types quicker than me!

                     

                     

                    Edited By Robert Atkinson 2 on 31/08/2021 16:26:34

                    #560548
                    Clive Foster
                    Participant
                      @clivefoster55965

                      Screwfix supply the Hylec 1 entry micro plug and socket system. Said to be 14 mm diameter and able to accommodate 1.5 sq mm cables but no current rating given. 400 V rated so pretty safe.

                      Expensive at nearly £15 a pop.

                      **LINK**

                      https://www.screwfix.com/p/hylec-1-entry-dp-micro-plug-socket-connector/345gx#product_additional_details_container

                      Not keen on the rubber garden tool type two pin connectors. All the ones I've encountered have been a right battle to separate.

                      Clive

                      #560558
                      DC31k
                      Participant
                        @dc31k

                        Please have a look at Neutrik Powercon True 1 Top as it might do what you want.

                        http://www.neutrik.co.uk/neutrik/products/powercon/powercon-true1-top/powercon-true1-top-cable-connectors

                        #560564
                        Robert Atkinson 2
                        Participant
                          @robertatkinson2

                          The Hylec looks very good. Not seen those before. A bit long though. It's 10A

                          https://www.hylec-apl.com/Weatherproof-Waterproof-Connectors-Range/Micro-TeePlug-and-Sockets/THB_381_A2B_L.html

                          Screwfix don't describe it well and it's listed under cable joiners.

                          The PowerCons are very good but nearly as big as a C14/15 at more cost.

                          #560572
                          Michael Gilligan
                          Participant
                            @michaelgilligan61133

                            Thanks for the further input yes

                            Just to show the scale of the problem, here’s a quick snapshot of the unit:

                            .

                            9c54e66e-7805-4740-a278-f282296da462.jpeg

                            .

                            It came crammed into a surprisingly small cardboard box … but there’s no way I would want to use that for storage.

                            What I was hoping to do is snip the lead at about 9” from the Heyco strain relief, and insert a pluggable [and preferably locking] connecter with a much more flexible mains lead. … then I would be able to store the two separately.

                            MichaelG.

                            .

                            P.S. __ Sorry there’s no fill-in flash on that snapshot !

                            #560579
                            Michael Gilligan
                            Participant
                              @michaelgilligan61133

                              This was the most promising candidate that I found:

                              **LINK** : https://www.farnell.com/datasheets/3165736.pdf

                              … but I was hoping for something smaller

                              MichaelG.

                              #560582
                              Robert Atkinson 2
                              Participant
                                @robertatkinson2

                                Those pro-elec connectors are copies of the Bulgin Buccaneer range. They are not approved for use as mains power connectors on hand-held items.

                                Thee is probably room in the flash to fit one of these

                                https://uk.farnell.com/schurter/6160-0004/inlet-iec-c8-2571-2-5a/dp/2080477

                                from the outside. You might have to make a shaped packer for it.
                                They are cheap, approved for the job and work with standard leds so if you forget yours you have a chance of borrowing something.

                                A locking cnnector may not be the best idea. Better a plug comming out if someone trips on a lead tahn a flash and tripod crashing down.

                                Robert G8RPI.

                                Edited By Robert Atkinson 2 on 31/08/2021 20:31:35

                                #560592
                                Michael Gilligan
                                Participant
                                  @michaelgilligan61133

                                  Thanks, Robert …

                                  I am hoping to avoid opening the unit; but if nothing more suitable appears, I may end up putting one of those in a little box on the shortened lead.

                                  MichaelG.

                                  .

                                  Ref. __ https://www.farnell.com/datasheets/2108396.pdf

                                  P.S. __ The ‘studio’ in question is my table-top light tent.

                                   

                                  Edited By Michael Gilligan on 31/08/2021 21:14:44

                                  #560594
                                  DMB
                                  Participant
                                    @dmb

                                    Why not hunt around for a bigger box? Goods on Amazon (e.g.,)come in various sizes of boxes.

                                    #560596
                                    Maurice Taylor
                                    Participant
                                      @mauricetaylor82093

                                      Hi, Why not do it the easy way ,use a 2 pin garden equipment plug and socket cable joiner.

                                      Maurice

                                      #560598
                                      Michael Gilligan
                                      Participant
                                        @michaelgilligan61133
                                        Posted by Maurice Taylor on 31/08/2021 21:23:06:

                                        Hi, Why not do it the easy way ,use a 2 pin garden equipment plug and socket cable joiner.

                                        Maurice

                                        .

                                        Because it’s at least ten times the size and weight that I want

                                        … the whole unit only weighs 800g

                                        MichaelG.

                                        #560600
                                        Michael Gilligan
                                        Participant
                                          @michaelgilligan61133
                                          Posted by DMB on 31/08/2021 21:20:30:

                                          Why not hunt around for a bigger box? Goods on Amazon (e.g.,)come in various sizes of boxes.

                                          .

                                          Because I want to store it in a padded bag, with the mains lead and its plug in another.

                                          MichaelG.

                                          #560613
                                          Michael Gilligan
                                          Participant
                                            @michaelgilligan61133

                                            A question for Robert:

                                            If I go the C8 route … Would this 4metre C7 lead be acceptable, with the substitution of a U.K. mains plug ?

                                            **LINK** : https://www.farnell.com/datasheets/2705354.pdf

                                            It’s specified 125V, 7A … They don’t appear to list a 250V, 2.5A version

                                            I would expect the C7 plug should be dual rated, but is the cable ?

                                            MichaelG.

                                            #560636
                                            Andrew Entwistle
                                            Participant
                                              @andrewentwistle

                                              The dielectric strength between the cores at >2kV L-N suggests there is no problem isolating 230V, especially with the additional insulation of the outside sheath. Durability needs to be the same whether 110 or 230. I would have no qualms about using this cable at 230V for a home project, but for a more official application the correct rating would be required – even though I suspect it is just testing and screen printing that makes the difference.

                                              #560638
                                              Andrew Entwistle
                                              Participant
                                                @andrewentwistle

                                                For a really compact connector you might be able to trim the C7 plug and encapsulate it in a potting box, also trimmed or 3D printed.

                                                #560643
                                                Michael Gilligan
                                                Participant
                                                  @michaelgilligan61133
                                                  Posted by Andrew Entwistle on 01/09/2021 09:12:28:

                                                  The dielectric strength between the cores at >2kV L-N suggests there is no problem isolating 230V, especially with the additional insulation of the outside sheath. Durability needs to be the same whether 110 or 230. I would have no qualms about using this cable at 230V for a home project, but for a more official application the correct rating would be required – even though I suspect it is just testing and screen printing that makes the difference.

                                                  .

                                                  My thinking too, Andrew yes

                                                  But as Robert raised the issue of Approval, I thought it wise to ask his opinion.

                                                  MichaelG.

                                                  #560646
                                                  Michael Gilligan
                                                  Participant
                                                    @michaelgilligan61133
                                                    Posted by Andrew Entwistle on 01/09/2021 09:15:50:

                                                    For a really compact connector you might be able to trim the C7 plug and encapsulate it in a potting box, also trimmed or 3D printed.

                                                    .

                                                    For a really compact [but non-Approved] connector pair, I am tempted to build my own … I have some beautiful stackable pins which would make a very good start.

                                                    MichaelG.

                                                    #560698
                                                    Neil Wyatt
                                                    Moderator
                                                      @neilwyatt

                                                      Google for "Masterplug Mains Inline Connector".

                                                      At 10A rating it's pretty compact and easily used to split an existing cable. Often used for garden tools.

                                                      Neil

                                                    Viewing 25 posts - 1 through 25 (of 39 total)
                                                    • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                                                    Latest Replies

                                                    Home › Forums › General Questions › Topics

                                                    Viewing 25 topics - 1 through 25 (of 25 total)
                                                    Viewing 25 topics - 1 through 25 (of 25 total)

                                                    View full reply list.