Lanz tractor

This topic has 3 replies, 2 voices, and was last updated 18 July 2019 at 14:18 by john brown 17.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
18 July 2019 at 10:17 #419588
john brown 17
Participant
@johnbrown17
Oh Joy ,been thinking ahead as l need a bearing for another job ,it turns out that apart from 4 of the bearings on the lanz model ,the rest of the bearings are not off the shelve type grrrrrrr ,so looks like it going to be oil light or bronze bushes so advice would be most welcome please,of to find another room with no light .

john
Advert

18 July 2019 at 10:17 #26722
john brown 17
Participant
@johnbrown17
Bearings
18 July 2019 at 12:28 #419601
JasonB
Moderator
@jasonb
It's not ideal to machine oilite particularly a small internal bore so best to use bronze, SA660 would be the ideal choice and machines better than others.

It is possible to turn the outside of Oilite bushes with very sharp HSS or a **GT tip but reaming the inside will not give a good internal finish.
18 July 2019 at 14:18 #419611
john brown 17
Participant
@johnbrown17
Thanks jason for that info,will bear that in mind for the future ,have been chatting to the firm l use for bearings and for once a local firm ,now l can get over more of the bearing sizes by using imperial and then machine to fit ,so apart from a couple of bearings that will have to be bronze ,and yes jason will use SA660.It would be nice to get drawings with bits on the shelve ,but then it would be to simple,plus the drawings were free,but am plugging away,thanks for your time.

john
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What the hell is going on with the suppliers??? 1 2
  Started by: Hollowpoint in: General Questions
- 23
- 46
- 17 August 2026 at 20:47
  JasonB
- Homeworkshop Ads down?
  Started by: Andrew Tinsley in: General Questions
- 3
- 3
- 17 August 2026 at 20:04
  Mark Rand
- turning long small diameters
  Started by: Speedy Builder5 in: Workshop Techniques
- 5
- 6
- 17 August 2026 at 18:46
  bernard towers
- two traction engines
  Started by: gary in: Traction engines
- 2
- 2
- 17 August 2026 at 18:16
  JasonB
- What is this symbol ?
  Started by: paul1956 in: Beginners questions
- 12
- 20
- 17 August 2026 at 17:06
  Bazyle
- Stuart Beam Piston 1 2
  Started by: Chris Taylor 3 in: Beginners questions
- 12
- 30
- 17 August 2026 at 17:05
  Chris Taylor 3
- Bridge collapse
  Started by: JA in: The Tea Room
- 5
- 5
- 17 August 2026 at 16:59
  peak4
- Jowitt Major Completion
  Started by: JasonB in: Stationary engines
- 1
- 2
- 17 August 2026 at 16:52
  JasonB
- Chronos closing down.
  Started by: Andrew Tinsley in: General Questions
- 4
- 4
- 17 August 2026 at 16:31
  paul1956
- Self dimming welding mask
  Started by: Andrew Tinsley in: General Questions
- 13
- 20
- 17 August 2026 at 16:14
  Nicholas Farr
- Myford 254 Plus toolpost type 1 2
  Started by: Dave Wootton in: Workshop Tools and Tooling
- 11
- 33
- 17 August 2026 at 15:24
  duncan webster 1
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 163
- 17 August 2026 at 13:53
  Nigel Graham 2
- Parting off 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 17
- 27
- 17 August 2026 at 13:46
  vintagengineer
- Best for BA Fasteners
  Started by: Charles Lamont in: Materials
- 6
- 6
- 17 August 2026 at 13:36
  bernard towers
- Event and Access Changes due to Fire Risk
  Started by: Neil Wyatt in: Model engineering club news
- 2
- 2
- 17 August 2026 at 13:35
  Nigel Graham 2
- Steam pressure guages
  Started by: Peter Venn in: General Questions
- 8
- 10
- 17 August 2026 at 13:29
  Nigel Graham 2
- Tools you hate using or just don’t get on with? 1 2 3
  Started by: Hollowpoint in: General Questions
- 35
- 73
- 17 August 2026 at 11:05
  peak4
- Myford S7 MKI lubrication spindle bearing
  Started by: Werner Habbel in: Manual machine tools
- 1
- 1
- 17 August 2026 at 09:50
  Werner Habbel
- Lidl Parkside drill bit sharpener 1 2
  Started by: AJW in: Workshop Tools and Tooling
- 16
- 28
- 16 August 2026 at 22:10
  peak4
- Preview of whats coming in Freecad 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 1
- 1
- 16 August 2026 at 20:21
  Russell Eberhardt
- How much has AI affected you personally so far? 1 2
  Started by: Robin Graham in: The Tea Room
- 23
- 32
- 16 August 2026 at 16:24
  Mark Rand
- Name Plate Recreated.
  Started by: JasonB in: Work In Progress and completed items
- 5
- 9
- 16 August 2026 at 16:10
  Bill Phinn
- When is a threaded insert preferable to tapping directly into aluminum?
  Started by: elowen01 in: General Questions
- 16
- 19
- 16 August 2026 at 10:41
  HOWARDT
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 327
- 15 August 2026 at 16:02
  Phil Whitley
- ELLIE the steam tram book – wanted
  Started by: apprentice in: Help and Assistance! (Offered or Wanted)
- 4
- 5
- 15 August 2026 at 13:38
  apprentice

Lanz tractor

Lanz tractor

Latest Replies

Latest Issue

August 2026

Newsletter Sign-up

Latest Replies