Simple Mill Engine

This topic has 11 replies, 6 voices, and was last updated 26 December 2013 at 18:29 by Sub Mandrel.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
24 December 2013 at 14:30 #138667
Eric Cox
Participant
@ericcox50497
What happened to the mill engine article ME 4472 p48. It finishes mid sentence and is missing "to be continued"
Advert

24 December 2013 at 14:30 #23033
Eric Cox
Participant
@ericcox50497
24 December 2013 at 14:51 #138669
Stewart Hart
Participant
@stewarthart90345
I was wondering the same Eric, I thought it was down to have another page. I’ve emailed Dian.

Stew
24 December 2013 at 15:15 #138670
Stewart Hart
Participant
@stewarthart90345
Just gone back and checked the proofs and yes it was down to have another page, I'm sure Diane will know the answer.

Stew
24 December 2013 at 21:14 #138692
Sub Mandrel
Participant
@submandrel
I betit's the fault of the technical editor, whatshecalled? Steven Hurt or something like that!

Sorry Stew

Neil
25 December 2013 at 17:03 #138717
Gone Away
Participant
@goneaway
Any idea how many "episodes" are left in this series after ME 4472?
26 December 2013 at 08:41 #138744
Stewart Hart
Participant
@stewarthart90345
Posted by OMG on 25/12/2013 17:03:18:

Any idea how many "episodes" are left in this series after ME 4472?

Merry Christmas OMG:- Its nearing the end probably two but that will be up to Diane the editor.

You may have noticed that I posted a thread for a simple Vertical Cross Single engine that will use many parts the same or similar to the Simple Mill Engine so if you've made the Mill Engine you should be able to make it also.

Just to give you an idea this is the front view

And this is how far I've got with it so far I'll probably have it finished in 5 to 6 weeks

Thanks for your interest

Stew
26 December 2013 at 09:33 #138752
doubletop
Participant
@doubletop
Stew

Apparently its your birthday.? but with the time zone thing its not clear if that is today or yesterday?

Anyway congrats and a bit of a milestone as far as I can tell

Pete
26 December 2013 at 09:59 #138755
Stewart Hart
Participant
@stewarthart90345
Thanks Pete

It’s today 26th and it’s 65 years young I’m officially an OAP now.

Thanks again

Stew
26 December 2013 at 15:31 #138784
Gone Away
Participant
@goneaway
Posted by Stewart Hart on 26/12/2013 08:41:30:

Merry Christmas OMG:- Its nearing the end probably two but that will be up to Diane the editor.

(Belated) Merry Christmas to you too, Stew.

Thanks for the info. I ask because my digital subscription just ran out and I won't be renewing at the current price. I'll have to look for the remaining issues in the bookstore …. although, as far as I can see, both mags have pretty much disappeared from the shelves around this area in Canada. (They didn't seem to sell well at the prices the stores felt necessary, given the exorbitant price the Canadian distributor asks).
26 December 2013 at 16:07 #138791
John Stevenson 1
Participant
@johnstevenson1
Posted by Stewart Hart on 26/12/2013 09:59:33:
Thanks Pete

It's today 26th and it's 65 years young I'm officially an OAP now.

Thanks again

Stew

It gives you a nice warm feeling when you trot out "I'm only a pensioner now "
26 December 2013 at 18:29 #138803
Sub Mandrel
Participant
@submandrel
Happy birthday Stew!

Neil
Author

Posts