separating Super 7 from its table to move it

separating Super 7 from its table to move it

This topic has 3 replies, 3 voices, and was last updated 23 November 2020 at 23:49 by Steviegtr.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
23 November 2020 at 21:02 #509473
Keith Halton
Participant
@keithhalton36144
I need to move a Super 7 and am trying to disconnect the lathe from the table it is mounted on. I've removed the four coach screws that hold the bed down but the lathe is still attached to the table by the on/off switch. See two photos below. So far, I haven't worked out the best way to separate lathe and table. It looks like there is a short (1" or so) length of conduit firmly holding the lathe and table together. Any suggestions on how to get them apart?
Advert

23 November 2020 at 21:02 #20041
Keith Halton
Participant
@keithhalton36144
23 November 2020 at 22:20 #509492
Martin Kyte
Participant
@martinkyte99762
Unscrew the brass nipple where the wires feed through into the Dewhurst switch.

regards Martin
23 November 2020 at 23:49 #509516
Steviegtr
Participant
@steviegtr
Yes . as above. Isolate the supply. Mark & disconnect the wires. Remove the brass bush & it should be free.

Steve.

Edited By Steviegtr on 23/11/2020 23:50:16
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- SmallRig Cheese Plate
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 2
- 4
- 11 July 2026 at 19:04
  Michael Gilligan
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 41
- 137
- 11 July 2026 at 19:00
  Nigel Graham 2
- Lathe coolant applicators 1 2
  Started by: lucerne in: Manual machine tools
- 15
- 26
- 11 July 2026 at 18:51
  Nigel Graham 2
- What is this?
  Started by: Sonic Escape in: General Questions
- 11
- 18
- 11 July 2026 at 18:30
  duncan webster 1
- Another what’s this thread….
  Started by: Hollowpoint in: General Questions
- 4
- 5
- 11 July 2026 at 18:18
  vintagengineer
- First Printer
  Started by: vintagengineer in: 3D Printers and 3D Printing
- 2
- 2
- 11 July 2026 at 17:44
  John Haine
- Impending collapse in NYC
  Started by: Michael Gilligan in: The Tea Room
- 12
- 23
- 11 July 2026 at 17:08
  Michael Gilligan
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 53
- 11 July 2026 at 13:57
  Adam Harris
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 5
- 6
- 11 July 2026 at 13:11
  JasonB
- Metal saw
  Started by: Speedy Builder5 in: Workshop Techniques
- 2
- 2
- 11 July 2026 at 12:49
  Clive Foster
- Spindle/bearings fit query for X2 type mill 1 2 3
  Started by: fingerscrossed in: Manual machine tools
- 14
- 53
- 11 July 2026 at 12:34
  Dave Halford
- Hole Sizes
  Started by: John Purdy in: 3D Printers and 3D Printing
- 6
- 12
- 11 July 2026 at 10:03
  JasonB
- Air con cost?
  Started by: Ian Parkin in: The Tea Room
- 7
- 7
- 11 July 2026 at 09:17
  Bazyle
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 5
- 10 July 2026 at 21:37
  old mart
- Cotton-covered flex
  Started by: Kiwi Bloke in: Materials
- 9
- 10
- 10 July 2026 at 20:03
  howardb
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 15
- 22
- 10 July 2026 at 19:39
  Clive Steer
- Farm Boy – Drawing 11
  Started by: Speedy Builder5 in: I/C Engines
- 4
- 4
- 10 July 2026 at 17:15
  John Purdy
- When is a new 90 degree drill not 90 degrees? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 21
- 49
- 10 July 2026 at 16:48
  Nicholas Farr
- BridgePort Interact 1 Mk2 parameters
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:31
  tomcnc
- Bridgeport Interact 1 Mark 2 circuit diagrams
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 10 July 2026 at 01:16
  tomcnc
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 5
- 5
- 9 July 2026 at 20:27
  Wade Beatty
- Tom Senior Vertical Mill Y axis stuck
  Started by: tgglass in: Beginners questions
- 12
- 18
- 9 July 2026 at 19:08
  Michael Gilligan
- Transformer question
  Started by: Wade Beatty in: Electronics in the Workshop
- 3
- 5
- 9 July 2026 at 17:30
  Robert Atkinson 2
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 66
- 9 July 2026 at 11:47
  KEITH BEAUMONT
- Offen imperial bore mic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 6
- 11
- 8 July 2026 at 22:27
  alecs

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies