TNMG1604 Shim

TNMG1604 Shim

This topic has 6 replies, 3 voices, and was last updated 26 August 2018 at 17:32 by Vic.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
25 August 2018 at 19:55 #369036
Vic
Participant
@vic
Do any of you know where I might get a shim for my tool holder at a good price? The tool holder takes TNMG1604 inserts. The shim is 3.18 thick and the pin it goes on is about 5.6mm. For the price I’ve found over here so far I could get a complete new tool holder from eBay. TIA.
Advert

25 August 2018 at 19:55 #19055
Vic
Participant
@vic
25 August 2018 at 21:35 #369045
ChrisB
Participant
@chrisb35596
Is this what you're after? **LINK** or this https://www.shop-apt.co.uk/shims-seats/tn1603-itsn-322-shim-for-tnmg-1604-apt-m-style-toolholder.html

Edited By ChrisB on 25/08/2018 21:38:50
25 August 2018 at 22:04 #369052
Neil Lickfold
Participant
@neillickfold44316
There are many shims for TNMG holders. So a brand of holder is needed. You can probably by a cheap brand holder for the price of some shims these days.
26 August 2018 at 11:32 #369102
Vic
Participant
@vic
Thanks Chris, the second one may fit. By the time I’ve paid vat and postage on that though I could get a complete holder for about 30p more!
26 August 2018 at 16:44 #369150
ChrisB
Participant
@chrisb35596
Where do you get holders so cheaply? It's a £3.60 shim plus postage £3.10, a holder would cost at least double that amount unless we're talking Banggood stuff..
26 August 2018 at 17:32 #369157
Vic
Participant
@vic
I think I got the last one on the auction site for £6.99 inc postage. I’ll order another one as it’s been quite handy and TNMG inserts last ages.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Softening epoxy 1 2
  Started by: John Haine in: General Questions
- 21
- 34
- 26 August 2025 at 11:20
  John Haine
- Hereward
  Started by: Richard Simpson in: Model Boats
- 2
- 4
- 26 August 2025 at 11:16
  Richard Simpson
- Myford VMB mill, head lift.
  Started by: lctikka61 in: Manual machine tools
- 2
- 2
- 26 August 2025 at 10:39
  John Haine
- QCTP for chester lathe 1 2
  Started by: Chris12 in: Beginners questions
- 11
- 27
- 26 August 2025 at 10:17
  dk0
- Granville lathe leadscrew change wheel
  Started by: JACK SIDEBOTHAM in: Help and Assistance! (Offered or Wanted)
- 11
- 18
- 26 August 2025 at 10:05
  Graham Flavell
- 3″ Castings – Help/Advice needed
  Started by: Andy Porter 1 in: Traction engines
- 5
- 10
- 26 August 2025 at 10:04
  JasonB
- Valve gear problem
  Started by: John Billard 1 in: Locomotives
- 3
- 3
- 26 August 2025 at 09:08
  Charles Lamont
- Recommendations for book on clock repairs
  Started by: Andy Stopford in: Clocks and Scientific Instruments
- 8
- 10
- 25 August 2025 at 21:15
  Andy Stopford
- Lathe tool inserts
  Started by: Andy Brocklehurst in: Beginners questions
- 5
- 10
- 25 August 2025 at 18:01
  old mart
- What Did You Do Today 2025 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 35
- 228
- 25 August 2025 at 17:30
  Roderick Jenkins
- Drain Cock search
  Started by: Speedy Builder5 in: Locomotives
- 4
- 8
- 25 August 2025 at 16:48
  Diogenes
- Bending copper tube?
  Started by: Bo’sun in: Workshop Techniques
- 11
- 14
- 25 August 2025 at 16:06
  Pete
- Blackgates 3 Way Toolpost Casting
  Started by: John McCulla in: Materials
- 15
- 25
- 25 August 2025 at 16:06
  Nicholas Farr
- Smart & Brown Model L lathe help required
  Started by: AJAX in: Manual machine tools
- 3
- 7
- 25 August 2025 at 15:14
  old mart
- Quartz clock movement
  Started by: duncan webster 1 in: Electronics in the Workshop
- 4
- 6
- 25 August 2025 at 10:24
  Michael Gilligan
- Milling for beginners book, Where?
  Started by: andy198712 in: Beginners questions
- 8
- 15
- 25 August 2025 at 09:16
  andy198712
- Museum donation
  Started by: Stephen Wessel 1 in: Introduce Yourself – New members start here!
- 3
- 3
- 25 August 2025 at 06:54
  Diogenes
- Phone Phreaking
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 11
- 15
- 24 August 2025 at 23:20
  Chris Crew
- THE MAUDSLAY TABELE ENGINE
  Started by: sivtek1 in: Stationary engines
- 4
- 7
- 24 August 2025 at 20:27
  Michael Gilligan
- Progress no.1 restoration
  Started by: flyingsailor in: Workshop Tools and Tooling
- 9
- 12
- 24 August 2025 at 19:52
  duncan webster 1
- A4 stainless
  Started by: David Ambrose in: Materials
- 14
- 22
- 24 August 2025 at 19:15
  old mart
- Joined 24 August 2025
  Started by: simon912 in: Introduce Yourself – New members start here!
- 3
- 3
- 24 August 2025 at 18:59
  noel shelley
- The stand alone weight for tower clock 1 2
  Started by: dk0 in: Clocks and Scientific Instruments
- 12
- 38
- 24 August 2025 at 18:33
  bernard towers
- Denford Orac refit
  Started by: Richard Evans 2 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 5
- 24 August 2025 at 16:59
  Richard Evans 2
- Manual for Warco GH750 or Chester Cub 630
  Started by: Gavlar in: General Questions
- 7
- 17
- 24 August 2025 at 16:03
  Gavlar

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies