Amadeal mill

Amadeal mill

This topic has 4 replies, 3 voices, and was last updated 8 March 2023 at 20:48 by Jonathon MC.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
7 March 2023 at 16:37 #636560
Jonathon MC
Participant
@jonathonmc86670
Just bought an ama wm18L and need to take head off to lift onto bench. Must be very obvious and simple but cant see it please ……!
Advert

7 March 2023 at 16:37 #16429
Jonathon MC
Participant
@jonathonmc86670
Dismantling
8 March 2023 at 13:07 #636695
Roger Best
Participant
@rogerbest89007
Have you looked underneath the head, get right down and look up towards the pivot point?

I don't have one but the one on the advert looks like my Warco. The screws that hold the head against rotation come out and allow it to be removed.
8 March 2023 at 13:15 #636699
JasonB
Moderator
@jasonb
I think you also need to undo a grub screw that locate sin a groove in the head pivot that stops it sliding out. have a look for the Warco WM18 which is a similar and more popular machine.
8 March 2023 at 20:48 #636784
Jonathon MC
Participant
@jonathonmc86670
Thanks very much I can see them.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Axle pin question – choice of material and possible need for case hardening?
  Started by: barryblundell in: Materials
- 4
- 6
- 15 June 2026 at 21:36
  barryblundell
- How Good Are 3D Printers?
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 10
- 14
- 15 June 2026 at 21:23
  Peter Cook 6
- Orbital – Not your Usual Oscillator!
  Started by: JasonB in: Stationary engines
- 4
- 5
- 15 June 2026 at 21:14
  Grizzly bear
- Wallace valvegear simulator
  Started by: Kevan Shaw in: General Questions
- 7
- 24
- 15 June 2026 at 19:29
  John Purdy
- Replacement Allbrit Draftmaster Protractor Rulers
  Started by: wigan2026 in: Workshop Tools and Tooling
- 7
- 14
- 15 June 2026 at 18:06
  Grindstone Cowboy
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 18
- 30
- 15 June 2026 at 16:33
  ega
- Commercial ads in classified
  Started by: Andrew Tinsley in: General Questions
- 2
- 2
- 15 June 2026 at 15:48
  JasonB
- Lathe cutting aggressive taper
  Started by: Lee Kennedy in: Manual machine tools
- 10
- 11
- 15 June 2026 at 15:16
  John Hinkley
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 8
- 67
- 15 June 2026 at 11:33
  John Hinkley
- KMO RETROL 1/4 Scale Lister D Engine with some Mods.
  Started by: Blue Heeler in: I/C Engines
- 2
- 2
- 15 June 2026 at 11:01
  noel shelley
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 18
- 15 June 2026 at 07:08
  Peter Hoerlein
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 13
- 25
- 14 June 2026 at 21:24
  Julie Ann
- Taper Identification
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 2
- 2
- 14 June 2026 at 20:46
  Chris Crew
- Lightning 1 2 3
  Started by: duncan webster 1 in: Electronics in the Workshop
- 14
- 51
- 14 June 2026 at 11:07
  Robert Atkinson 2
- Testing Single Point Thread Fitment
  Started by: berwick in: Beginners questions
- 12
- 16
- 14 June 2026 at 10:18
  alecs
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 8
- 30
- 13 June 2026 at 17:56
  jaCK Hobson
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 115
- 13 June 2026 at 15:38
  Dalboy
- Hindu ascetic in picture gallery
  Started by: Bill Phinn in: Website Questions, Comments, and Suggestions
- 3
- 3
- 13 June 2026 at 15:37
  Neil Wyatt
- Bridgeport Milling Machine feed control module
  Started by: Mark Willis in: Workshop Tools and Tooling
- 13
- 25
- 13 June 2026 at 13:08
  henrik83
- international exhibition 1862
  Started by: duncan webster 1 in: The Tea Room
- 9
- 13
- 13 June 2026 at 11:41
  gerry madden
- Air Duster
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 4
- 5
- 13 June 2026 at 10:00
  jaCK Hobson
- Bridgeport Series 1 CNC 1 2
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 50
- 13 June 2026 at 08:43
  Les Riley
- Gauge Glass Fitting
  Started by: Thomas Clarke in: General Questions
- 10
- 14
- 13 June 2026 at 08:33
  Luker
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 6
- 7
- 13 June 2026 at 08:22
  DC31k
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 30
- 12 June 2026 at 23:11
  Nigel Graham 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies