5″ TICH setting the quarterig

This topic has 3 replies, 2 voices, and was last updated 29 September 2017 at 16:42 by Kevin Bennett.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
29 September 2017 at 10:07 #319204
Kevin Bennett
Participant
@kevinbennett25223
Hi Everyone I am at a point if setting the crank on my 5" tich and fixing to the shaft .what side is the lead crank also the fixing to the shaft key ways or press fit

Thanks Kevin
Advert

29 September 2017 at 10:07 #1640
Kevin Bennett
Participant
@kevinbennett25223
29 September 2017 at 11:52 #319216
Clive Brown 1
Participant
@clivebrown1
Convention says RH crank leads, but doesn't really matter. On my Simplex I went for a very light, (not tight !) interference fit, smeared with Loctite 601. I did turn down a section of the length by 1 or 2 thou. to give clearance for the Loctite.

I added a "french key,". 1/8 inch dia. pin in hole drilled half in wheel hub, half in axle.

Edited By Clive Brown 1 on 29/09/2017 11:55:32

Edited By Clive Brown 1 on 29/09/2017 11:57:32
29 September 2017 at 16:42 #319252
Kevin Bennett
Participant
@kevinbennett25223
Thanks for that Clive a big help

Thanks Kevin
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Martin Cleeve Swing Clear Retracting Toolholder
  Started by: Roger Harvey in: Workshop Tools and Tooling
- 15
- 21
- 1 July 2026 at 17:57
  Michael Gilligan
- ultra sonic cleaner
  Started by: Dalboy in: General Questions
- 10
- 12
- 1 July 2026 at 17:34
  Diogenes
- Running 380V 3-phase motor on 230V 1-phase 1 2 3 4
  Started by: jimalm in: Electronics in the Workshop
- 19
- 79
- 1 July 2026 at 15:42
  Robert Atkinson 2
- How to stop juddering
  Started by: Peter Simpson 3 in: Beginners questions
- 7
- 10
- 1 July 2026 at 15:11
  Peter Simpson 3
- Gas Tap Valves. Vintage 1 2 3
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 21
- 61
- 1 July 2026 at 13:12
  Robert Atkinson 2
- Small hobby lathes.
  Started by: activeviii in: General Questions
- 7
- 10
- 1 July 2026 at 12:41
  lukeama123
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 37
- 1 July 2026 at 12:29
  Dave Halford
- Links for Workshop and Model Engineering STLs and other files.
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 9
- 12
- 1 July 2026 at 11:29
  timdotd
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 36
- 1 July 2026 at 10:51
  Graham Meek
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 24
- 40
- 30 June 2026 at 17:41
  Diogenes
- Using VFDs on old motors
  Started by: Andrew Skinner in: Electronics in the Workshop
- 11
- 22
- 30 June 2026 at 17:07
  Robert Atkinson 2
- Bateman Precision Pendulum Clock
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 2
- 2
- 30 June 2026 at 15:02
  John Haine
- DRO instructions
  Started by: Speedy Builder5 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 3
- 30 June 2026 at 12:11
  Speedy Builder5
- How do I learn machining ? 1 2 3 4
  Started by: paul1956 in: Beginners questions
- 32
- 95
- 30 June 2026 at 12:05
  bernard towers
- New here but have the swarf cuts
  Started by: activeviii in: Introduce Yourself – New members start here!
- 1
- 1
- 30 June 2026 at 10:59
  activeviii
- Help setting up myford lathe
  Started by: fln742j in: Workshop Techniques
- 5
- 5
- 30 June 2026 at 10:43
  noel shelley
- Hot chucks and cold spindles – caution 1 2
  Started by: Bazyle in: General Questions
- 16
- 28
- 30 June 2026 at 10:21
  Macolm
- A Hard Way To Cut Steel!
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 9
- 12
- 30 June 2026 at 09:53
  Clive Foster
- Sieg SX3.5 DRO Choices?
  Started by: IanT in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 7
- 30 June 2026 at 08:39
  jaCK Hobson
- Drawer Front Attachment
  Started by: Clive Brown 1 in: The Tea Room
- 8
- 12
- 29 June 2026 at 20:48
  mark costello 1
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 656
- 29 June 2026 at 16:56
  Turbine Guy
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 3
- 4
- 29 June 2026 at 16:23
  JasonB
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 2
- 5
- 29 June 2026 at 14:26
  Tony Ray
- New to me Denbigh Power Hacksaw
  Started by: southernchap in: Manual machine tools
- 4
- 7
- 29 June 2026 at 11:21
  southernchap
- Surface grinders choice
  Started by: greenhills in: Workshop Tools and Tooling
- 14
- 14
- 28 June 2026 at 22:42
  Chris Crew

5″ TICH setting the quarterig

5″ TICH setting the quarterig

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies