ER25 chuck

Advert

New Replies

Report Bug

Help/FAQs

ER25 chuck

This topic has 8 replies, 6 voices, and was last updated 21 October 2017 at 17:32 by duncan webster 1.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
20 October 2017 at 21:47 #322584
duncan webster 1
Participant
@duncanwebster1
I've got an Autoloc chuck, but mounted on MT2 taper it looks out of proportion, so I'm considering buying ER25. Could someone measure one for me, length and diameter of the body? Don't want to find it's that same size and I can't find anything on the interweb.

Thanks
Advert

20 October 2017 at 21:47 #13069
duncan webster 1
Participant
@duncanwebster1
20 October 2017 at 22:30 #322587
Robbo
Participant
@robbo
Duncan

ER25 Overall length body + closing nut is 49mm. Body dia 32mm, nut dia 42mm. Looks neat on an MT2 and quite small on MT3. I have MT2 for the lathe and MT3 for the mill.

My Autolock is Overall length 66mm, dia 44mm, nut is same dia as body, on MT3 it looks OK but they look a bit odd on MT2

Edited By Robbo on 20/10/2017 22:33:00
21 October 2017 at 09:51 #322607
ega
Participant
@ega
Posted by duncan webster on 20/10/2017 21:47:56:

I've got an Autoloc chuck, but mounted on MT2 taper it looks out of proportion, so I'm considering buying ER25. Could someone measure one for me, length and diameter of the body? Don't want to find it's that same size and I can't find anything on the interweb.

Thanks

I agree about the Autolock; mine has a damping ring which is said to improve its stability.

If you were to make your own ER chuck you would have some control over the dimensions.
21 October 2017 at 10:09 #322610
Journeyman
Participant
@journeyman
This is a *** LINK *** to Iscar's site to a table of sizes for ER chucks on various MT shanks, hope it helps.

John
21 October 2017 at 10:34 #322612
SteveI
Participant
@stevei
Duncan,

This is a link to a Rego Fix document that details the ER series cavity and nut dimensions. Not quite what you are looking for but it may be of use to you and others. I found it by a chance posting over on PM as I had not found any such reference by searching.

**LINK**

Steve
21 October 2017 at 13:52 #322637
duncan webster 1
Participant
@duncanwebster1
Thanks chaps, especially for the Iscar link. Looks like I'm spending more money! I have to have 3/8 BSW drawbar, so Chronos looks like it. Just don't tell SWMBO.

Duncan
21 October 2017 at 16:07 #322664
JohnF
Participant
@johnf59703
Hi Duncan, have a look at this link **LINK**
This one appears to be identical to the one supplied with my Emco FB2 many years ago, it is indeed very compact and works extremely well — I also have a Clarkson which has the threaded support collar rarely used except with larger cutters that may pull out of an ER collet if side cutting. I would research a little and ask the questions or maybe look on the Emco suppliers web site to see if they still supply them.
John
21 October 2017 at 17:32 #322694
duncan webster 1
Participant
@duncanwebster1
John,
trouble is I have a 3/8 BSW captive drawbar and the hole down the spout isn't big enough for M10. All my other stuff is 3/8 as well, so changing not attractive even if possible.
thanks anyway
Author

Posts