Colchester student 1800 lathe

Colchester student 1800 lathe

This topic has 3 replies, 3 voices, and was last updated 5 March 2014 at 21:13 by Nigel McBurney 1.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
1 March 2014 at 09:26 #145591
Anthony Collins
Participant
@anthonycollins76052
Hello I'm new to this forum so please bear with me.

I am trying to remove the bed piece from my gap bed lathe. I have taken out the three holding bolts but it will only lift 1/2 mm . Has anybody else had this problem.

Help!
Advert

1 March 2014 at 09:26 #12269
Anthony Collins
Participant
@anthonycollins76052
1 March 2014 at 10:38 #145600
Ady1
Participant
@ady1
Early students had 4 allen screws and no dowels

Two vertically from the top, two horizontally, one in each outer edge

Edited By Ady1 on 01/03/2014 10:50:45
5 March 2014 at 21:13 #146093
Nigel McBurney 1
Participant
@nigelmcburney1
My Colchester Master 2500 virtually the same as your lathe has 5 screws holding the gap piece in place,there are three vertical short cap head screws,and two long horizontal c/h scews. you can use a standard allen key but a 3/8 drive ratchet handle with allen key "sockets " is easier. as there is not much space between the end of the gap piece and the headstock.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Dopiest question ever…how to use a bin?
  Started by: Ian Parkin in: The Tea Room
- 4
- 6
- 11 November 2026 at 21:53
  Ian Parkin
- Hello everyone
  Started by: point.two.five in: Introduce Yourself – New members start here!
- 4
- 4
- 11 November 2026 at 19:25
  bernard towers
- Impact Bits
  Started by: Vic in: Workshop Tools and Tooling
- 5
- 7
- 11 November 2026 at 18:31
  old mart
- Myford
  Started by: Michael Gilligan in: Manual machine tools
- 6
- 7
- 11 November 2026 at 17:17
  Michael Gilligan
- Close-coupled Tees (Underfloor heating)
  Started by: Andy Stopford in: The Tea Room
- 7
- 16
- 11 November 2026 at 17:07
  Andy Stopford
- Micrometer ratchets 1 2
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 15
- 28
- 11 November 2026 at 16:42
  John MC
- Annoying advert 1 2
  Started by: Dalboy in: The Tea Room
- 18
- 30
- 11 November 2026 at 16:24
  Georgineer
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 4
- 12
- 11 November 2026 at 15:18
  Jan Raap
- 3d Printed Carriage Stop for Warco WM180 1 2
  Started by: James A in: Workshop Tools and Tooling
- 13
- 26
- 11 November 2026 at 14:55
  JasonB
- Kirimoto CAM
  Started by: Geoff Dunsby in: CAD – Technical drawing & design
- 3
- 14
- 11 November 2026 at 09:28
  JasonB
- What Did You Do Today 2026 1 2 … 10 11
  Started by: JasonB in: The Tea Room
- 56
- 252
- 10 November 2026 at 22:27
  Michael Gilligan
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 6
- 18
- 10 November 2026 at 17:23
  BOB BLACKSHAW 1
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 13
- 17
- 10 November 2026 at 16:05
  old mart
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 84
- 10 November 2026 at 12:07
  John Hinkley
- Straining the old grey matter!
  Started by: Geoff Dunsby in: Introduce Yourself – New members start here!
- 6
- 10
- 10 November 2026 at 10:42
  Geoff Dunsby
- Hello! …and help
  Started by: sbruce886 in: Introduce Yourself – New members start here!
- 5
- 8
- 10 November 2026 at 09:48
  noel shelley
- New Mystery Lathe 1 2
  Started by: mart7mcfl7 in: Manual machine tools
- 9
- 27
- 10 November 2026 at 07:35
  JasonB
- Pendulum Rod Weight Tray
  Started by: John Purdy in: Clocks and Scientific Instruments
- 4
- 15
- 10 November 2026 at 00:29
  duncan webster 1
- Trying a new controller
  Started by: John Haine in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 9
- 9 November 2026 at 23:02
  Geoff Dunsby
- Richard Simmonds’ “How To Make A Weight Driven Clock” 1 2
  Started by: iacooper in: Clocks and Scientific Instruments
- 13
- 29
- 9 November 2026 at 19:11
  John Purdy
- hello!
  Started by: poli2 in: Introduce Yourself – New members start here!
- 3
- 3
- 9 November 2026 at 18:01
  noel shelley
- The NCSC warns that …
  Started by: Michael Gilligan in: The Tea Room
- 13
- 16
- 9 November 2026 at 17:50
  noel shelley
- Physcad 1 2
  Started by: Ron Colvin in: CAD – Technical drawing & design
- 11
- 28
- 9 November 2026 at 17:18
  Fulmen
- Tiny Heliocentric Orrery
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 2
- 2
- 9 November 2026 at 09:42
  Ches Green UK
- Stepper Motor for Leadscrew 1 2
  Started by: James A in: Workshop Tools and Tooling
- 13
- 27
- 9 November 2026 at 09:04
  Nick Wheeler

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

November 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies