Wanted Copper Tube

This topic has 4 replies, 3 voices, and was last updated 26 June 2015 at 11:24 by MadMike.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
26 June 2015 at 06:38 #194940
Stewart Hart
Participant
@stewarthart90345
Hi

I have a friend who is building a 71/4" Gauge model of a LMS Crab 2-6-0 Loco and he is trying to obtain a length of copper tube for the boiler 8" to 81/4" OD * 20" in Length with a wall thickness 4mm or 5mm

He has a piece of sheet he could roll into a tube but would like to try and obtain a length of tube to save a bit of work.

Thanks

Stew
Advert

26 June 2015 at 06:38 #32513
Stewart Hart
Participant
@stewarthart90345
26 June 2015 at 08:25 #194945
Steve Withnell
Participant
@stevewithnell34426
You could try:

Please contact P L Hill with any queries or requirements:

01274 407343

07585 772183

67, Grasmere Road,

Bradford,

West Yorks

BD2 4HX

They advertise 4" diameter, but might know how to get hold of 8"

Steve
26 June 2015 at 08:36 #194948
Stewart Hart
Participant
@stewarthart90345
Thanks Steve

I've forwarded the details onto my mate.

Stew
26 June 2015 at 11:24 #194967
MadMike
Participant
@madmike
Stewart, try http://www.tubesupplies,co.uk Tel: 0208 230 5708. Their stocklist shows 1.1 metres of 8" OD copper tube in stock. HTH.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Lightning 1 2
  Started by: duncan webster 1 in: Electronics in the Workshop
- 12
- 37
- 10 June 2026 at 16:09
  duncan webster 1
- Myford VMC Spindle Advice Please.
  Started by: Nigel Graham 2 in: Manual machine tools
- 8
- 20
- 10 June 2026 at 15:22
  Graham Meek
- Taylor Hobson Pantograph Engraver Model D
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 7
- 22
- 10 June 2026 at 14:24
  Charles Jambon
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 8
- 9
- 10 June 2026 at 13:52
  Versaboss
- Gauge Glass Fitting
  Started by: Thomas Clarke in: General Questions
- 6
- 8
- 10 June 2026 at 11:45
  Dalboy
- Axminster Granite Surface Plate – Delamination of surface coating
  Started by: Greensands in: Workshop Tools and Tooling
- 6
- 6
- 10 June 2026 at 09:11
  Mark Rand
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 5
- 5
- 10 June 2026 at 09:10
  Bo’sun
- Fusion CAD / CAM Problem
  Started by: Shaun Churchill in: CAD – Technical drawing & design
- 3
- 5
- 9 June 2026 at 21:17
  Julie Ann
- Noggin End Metals?
  Started by: anonymouse in: Materials
- 2
- 2
- 9 June 2026 at 20:43
  Grizzly bear
- Another new member in France
  Started by: jimalm in: Introduce Yourself – New members start here!
- 6
- 6
- 9 June 2026 at 18:02
  Speedy Builder5
- PM,s
  Started by: Redpiperbob in: General Questions
- 3
- 6
- 9 June 2026 at 16:37
  peak4
- RS & J 4NHP in 2″ scale
  Started by: TREVOR WILSON in: Traction engines
- 2
- 2
- 9 June 2026 at 15:56
  Dave Halford
- An extraordinary lathe bargain?
  Started by: Robin Graham in: The Tea Room
- 10
- 10
- 9 June 2026 at 13:38
  JA
- Breaking gears in a Myford ML7
  Started by: drnewcomb in: Manual machine tools
- 14
- 21
- 9 June 2026 at 12:19
  Speedy Builder5
- Cheap digital spirit level accuracy 1 2
  Started by: Mick Bailey in: Workshop Tools and Tooling
- 18
- 44
- 9 June 2026 at 11:56
  Nicholas Farr
- Nickel Silver
  Started by: Carl in: Materials
- 10
- 13
- 8 June 2026 at 22:46
  old mart
- Steam wagon “Meg” advice, please.
  Started by: Mike Henderson 1 in: Traction engines
- 6
- 10
- 8 June 2026 at 22:19
  [email protected]
- S,O,D 1 2
  Started by: larry phelan 1 in: The Tea Room
- 27
- 30
- 8 June 2026 at 18:14
  Roderick Jenkins
- Improving a 30 taper fit
  Started by: Andrew Skinner in: Manual machine tools
- 11
- 18
- 8 June 2026 at 17:11
  bernard towers
- where to find locomotive / train plans ?
  Started by: zuji miko in: Beginners questions
- 5
- 7
- 8 June 2026 at 16:32
  JA
- 4 cylinder rotary valve
  Started by: AStroud in: Work In Progress and completed items
- 5
- 13
- 8 June 2026 at 16:15
  AStroud
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 112
- 8 June 2026 at 12:58
  renardiere7
- PVC joints
  Started by: Speedy Builder5 in: Workshop Techniques
- 6
- 10
- 8 June 2026 at 12:44
  blowlamp
- digital microscope for poor eyesight
  Started by: bernard towers in: Electronics in the Workshop
- 9
- 13
- 8 June 2026 at 08:13
  Dell
- Replacement Allbrit Draftmaster Protractor Rulers
  Started by: wigan2026 in: Workshop Tools and Tooling
- 6
- 10
- 7 June 2026 at 19:51
  Grindstone Cowboy

Wanted Copper Tube

Wanted Copper Tube

Latest Replies

Latest Issue

May 2026

Newsletter Sign-up

Latest Replies