The printer port isn’t dead! (linuxcnc is cool and powerful)

The printer port isn’t dead! (linuxcnc is cool and powerful)

This topic has 51 replies, 11 voices, and was last updated 15 March 2024 at 17:46 by sam sokolik.

Viewing 2 posts - 51 through 52 (of 52 total)

Author

Posts
28 February 2024 at 17:38 #716712
sam sokolik
Participant
@samsokolik60334
If I did the math right.. The servo is turning at almost 4000 rpm at 250ipm. That data sheet for these servos say the no load speed of these servos at 24v is 4916rpm.. So – I think 250ipm is where I am keeping it.

sam
Advert

15 March 2024 at 17:46 #720017
sam sokolik
Participant
@samsokolik60334
making the plastic bits into metal bits..
Author

Posts

Viewing 2 posts - 51 through 52 (of 52 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Hello.
  Started by: smokeyjoe25 in: Introduce Yourself – New members start here!
- 3
- 3
- 29 August 2025 at 14:38
  bernard towers
- Modular 3/4 inch TE info required
  Started by: Loose nut in: Traction engines
- 5
- 8
- 29 August 2025 at 14:14
  teamricky
- Weird electric actuator action
  Started by: ell81 in: Beginners questions
- 5
- 6
- 29 August 2025 at 13:14
  ell81
- Mercer comparator gauge repair help.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 4
- 8
- 29 August 2025 at 12:47
  Graeme Seed
- Painting mating surfaces
  Started by: Martin Cooper in: Beginners questions
- 10
- 18
- 29 August 2025 at 12:35
  SillyOldDuffer
- 125 mm chuck onto my lathe
  Started by: Steve Huckins in: General Questions
- 12
- 15
- 29 August 2025 at 11:56
  SillyOldDuffer
- interchangeable Myford beds
  Started by: Kundrus in: Manual machine tools
- 4
- 4
- 29 August 2025 at 09:47
  cogdobbler
- Indicator bulb with bayonet mount needed
  Started by: Wade Beatty in: Electronics in the Workshop
- 6
- 8
- 29 August 2025 at 09:20
  Wade Beatty
- Warco Super Major Milling Machine – Stripping Gearbox
  Started by: Lee Jones 6 in: Manual machine tools
- 9
- 13
- 29 August 2025 at 07:31
  Robert Atkinson 2
- Smart & Brown Model L lathe help required
  Started by: AJAX in: Manual machine tools
- 4
- 13
- 28 August 2025 at 20:50
  AJAX
- Progress no.1 restoration
  Started by: flyingsailor in: Workshop Tools and Tooling
- 9
- 13
- 28 August 2025 at 20:31
  old mart
- boiler leak
  Started by: Bill Dawes in: Locomotives
- 12
- 24
- 28 August 2025 at 19:07
  Bill Dawes
- Bendy Flexible Plywood
  Started by: Henry Buckeldee in: Related Hobbies including Vehicle Restoration
- 14
- 16
- 28 August 2025 at 18:13
  Henry Buckeldee
- Lathe tool inserts
  Started by: Andy Brocklehurst in: Beginners questions
- 9
- 20
- 28 August 2025 at 18:08
  Diogenes
- Museum donation
  Started by: Stephen Wessel 1 in: Introduce Yourself – New members start here!
- 4
- 6
- 28 August 2025 at 16:18
  Stephen Wessel 1
- Damp engine, Name?
  Started by: sivtek1 in: Stationary engines
- 6
- 14
- 28 August 2025 at 13:58
  cogdobbler
- Phone Phreaking
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 13
- 17
- 28 August 2025 at 08:13
  Roger Hart
- What Did You Do Today 2025 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 36
- 231
- 28 August 2025 at 00:07
  howardb
- Granville lathe leadscrew change wheel 1 2
  Started by: JACK SIDEBOTHAM in: Help and Assistance! (Offered or Wanted)
- 13
- 31
- 27 August 2025 at 21:06
  Howard Lewis
- Marcus Oxen … illustrated notebook
  Started by: Michael Gilligan in: The Tea Room
- 2
- 2
- 27 August 2025 at 16:45
  Harry Wilkes
- Softening epoxy 1 2
  Started by: John Haine in: General Questions
- 21
- 38
- 27 August 2025 at 12:56
  Robert Atkinson 2
- Hereward
  Started by: Richard Simpson in: Model Boats
- 6
- 11
- 27 August 2025 at 11:06
  cogdobbler
- Imperial Bearing Surprise!
  Started by: Peter_H in: General Questions
- 4
- 4
- 27 August 2025 at 10:06
  tonychap
- QCTP for chester lathe 1 2
  Started by: Chris12 in: Beginners questions
- 12
- 32
- 27 August 2025 at 08:17
  Vic
- Bending copper tube?
  Started by: Bo’sun in: Workshop Techniques
- 13
- 16
- 27 August 2025 at 02:05
  cogdobbler

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies