Shand Mason Fire Engine.

Advert

Shand Mason Fire Engine.

Home Forums Beginners questions Shand Mason Fire Engine.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #4690
    Chris
    Participant
      @chris16039
      Advert
      #41760
      Chris
      Participant
        @chris16039
        Despite being a novice I have decided to take on the Shand Mason Fire Engine project. (Keep your eye on this forum Gunter, there could be a lot of questions coming your way)! First one is ;- You say there are castings available but I can’t find where they are available from. I suspect the turntable is beyond my lathe so may have to buy the casting.
        If there is anyone else out there building the Shand I’d be pleased to hear from you.
        Chris.
        #41772
        JasonB
        Moderator
          @jasonb
          I think its the one that Reeves sell castings for, You will still need to finish turn the castings so they will be no smaller than a fabrication.
           
           
          Jason
          #63015
          ianj
          Participant
            @ians
            Hi.
            I’m considering building the Shand Mason Fire Engine. Reading the ME articles ,which started in May 2009 , on page 570 under the construction heading it states that the general arrangement is shown in fig 1, 2 & 3 but these do not appear to be included in the article ( fig 4 appears in the june issue) Were they included in a later issue?
             
             
            Regards Ian
            #63022
            JasonB
            Moderator
              @jasonb
              They are on the next page, 571
               
              I assume you have not got the actual mag? and whoever copied it stopped at 570 as that ends …..to be continued
               
              Jason

              Edited By JasonB on 23/01/2011 17:26:55

              #63025
              ianj
              Participant
                @ians
                Hi Jason.
                Thanks for that. As you suggested when I copied the article I stopped at page 570, never noticed 571 because of the free plans in between.
                Regards Ian
                #64766
                Shandyman
                Participant
                  @shandyman
                  Hi Ian,
                  don’t know if you are interested but I have a complete set of castings for the 2″ scale Shand Mason bought from Reeves some years ago. I have the chassis and wooden wheels complete to a very high standard, a complete copper silver soldered boiler, a full set of drawings and also the original set of Model Engineer magazines featuring the building of this model by Edgar T Westbury. So, the hard bits are all done, all that is left is the machining of the castings, steam fittings etc. I have not costed this out yet but I know the castings alone are now £340 and have no idea what a complet boiler would be. Anyway, if you are interested let me know and we can talk figures.
                   
                  John
                  #64771
                  ianj
                  Participant
                    @ians
                    Hi John.
                    Thanks for your kind offer but I have already built the wheels & nearly completed the chassis I already have the plans & ME articles. If I had not got this far I would have been interested.
                    Regards Ian
                    #64773
                    Shandyman
                    Participant
                      @shandyman

                      no probs. Ian, I would be interested to watch your progress. I started this project some 10 years ago as an ex firefighter it seemed the thing to do. Time and other projects prevent further progress so I will be advertising it soon. …..John

                      #64805
                      ronnie barker
                      Participant
                        @ronniebarker18785
                        john
                        i have sent you a email
                         
                        jonathan
                      Viewing 10 posts - 1 through 10 (of 10 total)
                      • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                      Advert

                      Latest Replies

                      Home Forums Beginners questions Topics

                      Viewing 25 topics - 1 through 25 (of 25 total)
                      Viewing 25 topics - 1 through 25 (of 25 total)

                      View full reply list.

                      Advert

                      Newsletter Sign-up