Replacement feedscrew and nut service on Lathes website.

[Dave WoottonParticipant @davewootton]

[Dave WoottonParticipant @davewootton]

There was a recent post from I think Robert about replacement feedscrew nuts for his Myford VMC milling machine. I did post a suggestion and he did thank me by PM, but like the idiot I am deleted it and now can't find his post. It was tacked on the end of another thread i think.

Anyway just looking on the Lathes uk machine tools for sale page, as you do, and there is an advert for service to manufacture or recondition feedscrews and nuts, thought it might prove useful information to someone.

Absolutely no connection to them, never used them and don't know anyone who has, but thought it was worth posting.

Dave

[Chris Evans 6Participant @chrisevans6]

I have seen the same or similar service offered on eBay listed under Colchester or Harrison lathes. I have re-furbished my own but a useful link for those requiring the service.

[Grindstone CowboyParticipant @grindstonecowboy]

Dave, if it's a thread you posted in, the easiest way to find it is, when you are logged in, click on the "My Posts" link on the green bar at the top of the page. You'll then see all your posts and can then track down which thread you're looking for. I do it all the time as I can never remember.

Rob

[Dave WoottonParticipant @davewootton]

Hi Rob

Thanks I found it easily following your method, I will send him a PM, another thing added to my meagre computer skills!

Dave

[Author]

Posts